ENGLISH
Wiring instructions
Green
Eyellowand
or green
Blue or black
N
Brownor red L
Fit 13 amp fuse
Use cable gripper
▲
FOR UK ONLY
WARNING: THIS APPLIANCE MUST BE EARTHED.
Important: the wires in this lead are coloured in accordance with the follo- wing codes:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
Connect the Green/Yellow wire to the ter- minal in the plug marked “ E ” (or by the
earth symbol) or coloured Green or colou- red Green and Yellow. Connect the Brown wire to the terminal in the plug marked
“L ” or coloured Red. Connect the Blue wire to the terminal in the plug marked
“N ” or coloured Black. A 13 amp fuse should be fitted when the appliance is connected to a BS 1362 plug. Seek pro- fessional advice if you are unsure of the correct procedure for the above.
Voltage
This appliance is designed to run on 230 - 240 volts only. Check that the mains supply corresponds to that shown on the rating plate of the appliance. If the appliance is to
be used in any country other than that of purchase, it should be checked by an approved Service Dealer. Standards can vary from country to country.
About your factory fitted plug
FOR UK ONLY
(supplied with certain models only)
The lead is already fitted with a plug incor- porating a 13 amp fuse. If the plug does not fit your socket outlet, see next paragraph.
Should you need to replace the fuse in the plug supplied, a 13 amp approved BS 1362 fuse must be used.
The fuse cover is an important part of the plug. Please ensure that it is always refitted. If you lose this cover please do not use the plug. You may contact TEFAL for a replacement.
If the plug supplied does not fit your soc- ket outlet, it should be removed from the mains lead and disposed of safely. The flexible cord insulation should be stripped back as appropriate and a suitable alterna- tive plug fitted. The replacement plug must be equipped with a 13 amp fuse.
Important: If the electrical cord of this appliance is damaged, it must only be replaced by an authorised Service Dealer. The safety of this appliance complies with the technical regulations and standards in force.