Sharp FP-A28U, FP-A28C operation manual Important Safety Instructions

Page 8

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

WARNING - To reduce the risk of electrical shock, fire or injury to persons:

Read all instructions before using the unit.

Use only a 120 volt outlet.

The air purifier has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit into the outlet, reverse it. If it still does not fit, contact a qualified electrician or service person. Do not alter the plug in any way.

Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loosened.

Periodically remove dust from the power plug.

Do not insert fingers or foreign objects into the air intake or air outlet.

When removing the power plug, always hold the plug and never pull the cord. Electrical shock and/or fire from short circuit may occur as a result.

Do not remove the plug when your hands are wet.

Do not use this unit near gas appliances or fireplaces.

Remove the power plug from the wall outlet before cleaning the unit and when not using the unit.

Electrical shock from bad insulation and/or fire from short circuit may occur as a result.

If the power cord is damaged, it must be replaced by the manufacturer, its service agent, Sharp Authorized Service Center or similarly qualified person in order to avoid a hazard.

Do not operate when using aerosol insecticides or in rooms where there is oily residue, incense, sparks from lit cigarettes, chemical fumes in the air or in very high humidity conditions, such as a bathroom.

Be cautious when cleaning the unit. Corrosive cleansers may damage the exterior.

Only Sharp Approved Service Center should service this air purifier. Contact the nearest Service Center for any problems, adjustments, or repairs.

NOTE - Radio or TV Interference

If this air purifier should cause interference to radio or television reception, try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the unit and radio/TV receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This product fulfils the requirement of the International standard CISPR 11.

In conformity with this standard, this product is classified as group 1 class B equipment.

Group 1 means that the equipment in which there is intentionally generated or used conductively coupled RF energy that is necessary for the internal functioning of the equipment itself.

Class B equipment means that the equipment suitable to be used in domestic establishments.

E-6

Image 8
Contents FP-A28U FP-A28C Page English For Customer Assistance the United States Consumer Limited Warranty Consumer Limited Warranty for U.S. UsersFor Customer Assistance Canada Limited Warranty Important Safety Instructions Installation Guidelines Place on a stable surface with sufficient air circulationPart Names 1610Filter Installation Filter InstallationPress the Power ON/OFF Button to turn the unit on Press the Mode Button to select the desired fan speedPress the Power ON/OFF Button to turn the unit off OperationCare and Maintenance UnitFilter Replacement Guidelines Replacement Hepa FilterReplacing the Hepa Filter Disposal of FilterTroubleshooting SpecificationsStandby Power Remedy not a malfunctionPage Déclaration de conformité Partie responsablePour Assistance À LA Clientèle Canada Garantie Limitée Consignes Importantes DE Sécurité Remarque Ventilation Nettoyer l’extérieur avec un chiffon douxNomenclature InclusRetirer le sac de plastique du filtre Hepa Installation DU FiltreInstaller le filtre Hepa Appuyer sur le commutateur pour désactiver l’appareil FonctionnementAppuyer sur le commutateur pour activer l’appareil Entretien AppareilÉlimination du Filtre Filtre Hepa de remplacementRemplacer LE Filtre Hepa Caractéristiques Solution pas un dysfonctionnementDépannage Page Declaración de conformidad Parte responsableInstrucciones DE Seguridad Importantes Precauciones DE Operación Botón de ON/OFF del ión Plasmacluster Nombres DE LAS PartesLuz del indicador del ión Plasmacluster Retire el panel trasero Retire la bolsa de plástico del filtro HepaFuncionamiento Cuidado Y Mantenimiento UnidadEliminación del filtro Reemplazo DEL Filtro HepaFiltro Hepa de repuesto Solución no es un mal funcionamiento Solución DE ProblemasEspecificaciones New Jersey 07495-1163 U.S.A Ontario L4Z 1W9 Canada Osaka, JapanV 0 Protect Your Investment

FP-A28C, FP-A28U specifications

The Sharp FP-A28U and FP-A28C air purifiers are exemplary models designed to enhance indoor air quality, equipped with advanced features and technologies that cater to both residential and commercial environments. These purifiers combine style with functionality, offering users an efficient air-cleaning solution that is silent yet powerful.

One of the defining features of the FP-A28U and FP-A28C is their highly effective HEPA filtration system. This system captures 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, smoke, and pet dander. This level of filtration is crucial for allergy sufferers and anyone looking to improve their indoor air quality.

In addition to HEPA filtration, these models incorporate Sharp’s exclusive Plasmacluster technology. This innovation involves the release of positive and negative ions into the air, which helps to neutralize airborne allergens, bacteria, and viruses. By creating a healthy balance of ions, Plasmacluster technology enhances the purification process and leaves a fresh, clean atmosphere.

The FP-A28U and FP-A28C also boast a multi-stage filtration system, which includes pre-filters and activated carbon filters. The pre-filter captures larger particles, therefore prolonging the life of the HEPA filter, while the activated carbon filter works to eliminate unpleasant odors and volatile organic compounds (VOCs) from the air.

User convenience is a priority with the FP-A28 models. They are designed with a sleek and modern aesthetic, making them suitable for any room decor. Moreover, the intelligent auto mode feature adjusts the purification level automatically based on the surrounding air quality. The built-in air quality indicator provides real-time feedback, allowing users to see how effectively the unit is working.

In terms of energy efficiency, the FP-A28U and FP-A28C are designed to operate quietly, making them ideal for night-time use or in spaces where noise is a concern. Their low power consumption ratings contribute not only to reduced energy bills but also to a smaller environmental footprint.

In summary, the Sharp FP-A28U and FP-A28C air purifiers stand out for their robust filtration capabilities, innovative Plasmacluster technology, multi-stage cleaning processes, and user-friendly features. They represent a commitment to enhancing indoor air quality, offering a breath of fresh air in today's pollutant-prone environments.