in the HP Mobile Broadband information provided with your computer or the mobile network operator may provide it separately from the computer.
For information about inserting and removing the SIM, see Inserting and removing a SIM on page 21 in this chapter.
For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband information included with your computer.
Inserting and removing a SIM
CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.
To insert a SIM, follow these steps:
1.Turn off the computer by using the Shut down command.
2.On select models, close the display.
3.Disconnect all external devices connected to the computer.
4.Unplug the power cord from the AC outlet.
5.Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE: The SIM in your computer may look slightly different from the illustration in this section.
6.Reconnect external power.
7.Reconnect external devices.
8.Turn on the computer.
To remove a SIM, press in on the SIM, and then remove it from the slot.
Using GPS (select models only)
Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites deliver location, speed, and direction information to
For more information, see the HP GPS and Location software Help.
Connecting to a wireless network 21