Sharp MD-M3H operation manual Radio Operation, Tuning, Manual tuning, Auto tuning

Page 18

RADIO OPERATION

■ Tuning

1

4

2,3,5

1 2,3,5

1 Press the ON/STAND-BY button to turn the power on.

2 Press the TUNER (BAND) button.

3 Press the TUNER (BAND) button to select the desired frequency band. (FM ST, FM or AM)

4 Press the TUNING (X or W) button to tune into the desired station.

Manual tuning:

Press the TUNING (X or W) button as many times as required to adjust the frequency shown on the display to the frequency of the desired station.

Auto tuning:

When the TUNING (X or W) button is pressed for more than 0.5 seconds, scanning will start auto- matically and the tuner will stop at the first receiv- able broadcast station.

Notes:

●When radio interference occurs during auto scan tuning, auto scan tuning may stop automatically at that point.

●If a weak station signal is found during auto scan tuning, the station will be skipped.

●To stop the auto tuning, press the TUNING (X or W) button again.

●When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light. Finally, the sta- tion name will appear.

5 To receive an FM stereo transmission, press the TUNER (BAND) button so that the "ST" indica- tor on the display lights up.

●"j" will appear when an FM broadcast is in stereo.

●If the FM reception is weak, press the TUNER (BAND) button so that the "ST" indicator goes out.

●The reception changes to monaural, the sound becomes clearer.

After use:

Press the ON/STAND-BY button to enter the stand- by mode.

Notes:

●The last station tuned in will be recalled, even after changing the tuning band or the function, or after switching the unit to the stand-by mode.

●If the unit's tuner interferes with the reception of a nearby TV or radio, move the unit as far away from these items as possible.

16

Image 18

Contents Contents MD-M3HTerms of Guarantee A9903.YTService Information Special NotesVolume control AccessoriesPrecautions GeneralNames of Controls and Indicators Front panelRear panel 16 17 18 19 20 21 Display windowSpeaker section Remote control MD/CD SectionPreparation for USE Aerial connectionSpeaker connection Speaker cushion Removing the speaker grilles Connecting the AC power leadDemo mode Placing the systemPlay Remote controlPrecautions for battery use To change the brightness of the disTo see the time display Setting the ClockTo change the time display mode To change the clock timeExtra bass X-BASS VolumeSound Control Pre-programmed equalizer SurroundTo interrupt playback Compact Disc OperationCD playback To stop playbackMinidisc Operation MD playbackTo remove a MiniDisc Repeat and random play Convenient CD and MD OperationApss Auto Program Search Sys- tem Cue and reviewTo clear the programmed selections To cancel the ApmsApms Automatic Programmable Music Selector To check which tracks are programmedSwitching the time display Changing the display during MD playbackTime Auto tuning TuningManual tuning Press the ON/STAND-BY button to enter the stand- by modePreset tuning Preset memory scanDisplay Mode Information provided by RDSPTY Test Alarm None To erase all of the contents of preset memory Aspm Auto Station Program MemoryTo stop the Aspm operation before it is complete To cancel the station select operation Page If you have selected the traffic programme To switch the display Presetx WTo manually recall the stations stored in memory About the Ptyi Dynamic PTY Indicator Checking the stand-by mode settingTo cancel the EON stand-by mode MeaningWhen in the EON stand-by mode, press the EON button EON-TIAbout the TP and TA indicators TP indicator TA indicator MeaningRecording Differences from tape recordingsDisc writing TOC About track numbers To check the remaining time available for recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing To stop recordingTo record without using One-Touch Editing Apms recordingCD0MD Edit High /NORMAL Recording from the built-in radio onto a MiniDisc To record the track number whilst record- ingRecording is performed as a single track Editing What the editing function can doType of characters used Within 10 seconds, press the Enter button To create a disc nameTo erase a disc name Press the Enter button to enter the characterTo create a track name To erase a track nameName TOC Edit Enter Clear To change disc names and track namesTo add a character Example To change Besut to BestWhen both tracks have a name DivideCombine Move To combine two non-contiguous tracksExample To erase tracks one at a time EraseAll Erase To erase all of the tracks at onceTimer Operation Timer playbackTimer recording To use sleep and timer playback in combi- nation Simultaneous sleep and timer op- erationTo cancel the sleep operation To use sleep and timer recording in com- binationUsing External Units Connecting external unitsHeadphones Listening to sound from an exter- nal unit Manual recordingWhat is a MINIDISC? Symptom Possible cause Remedy TroubleshootingIf a problem occurs Mini Disc System LimitationsMD recording and playback Symptom Possible causeCD Playback Radio receptionError Messages When an error message is displayed, proceed as followsResetting the Microcom Maintenance Puter External careCare of compact discs Specifications Memo