Sharp MD-M3H Resetting the Microcom Maintenance Puter, External care, Care of compact discs

Page 50

RESETTING THE MICROCOM-		MAINTENANCE
PUTER	■ Internal care
	■ Internal care

1,2

2

● Do not touch the Laser pickup lens. If fingerprints or dust accumulate on the pickup, clean it gently with a dry cotton swab.

If this product is subjected to strong external inter- ference (mechanical shock, excessive static elec- tricity, abnormal supply voltage due to light-ning, etc.) or if it is operated incorrectly, it may malfunc- tion or the display may not function correctly. If such a problem occurs, do the following:

1 Press the ON/STAND-BY button to enter the stand-by mode.

2 Press the ON/STAND-BY button whilst holding down the EQUALIZER button and the PLAY button.

Caution:

●The operation explained above will erase all data stored in memory including clock and timer settings, and tuner, MD and CD presets.

■External care

●Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then wipe with a dry cloth.

●Do not use chemically treated cleaning cloths or other chemicals.

■Care of compact discs

NO

YES

Correct

Compact discs are fairly resistant to damage, how- ever mistracking can occur due to an accumulation of dirt on the disc surface.

Follow the guidelines below for maximum enjoy- ment from your CD collection and player.

●Do not write on either side of the disc, particu- larly the non-label side.

Signals are read from the non-label side. Do not mark this surface.

●Keep your discs away from direct sunlight, heat, and excessive moisture.

●Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play prop- erly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.

48

Image 50

Contents Contents MD-M3HTerms of Guarantee A9903.YTService Information Special NotesVolume control AccessoriesPrecautions GeneralRear panel Names of Controls and IndicatorsFront panel Speaker section 16 17 18 19 20 21Display window Remote control MD/CD SectionSpeaker connection Preparation for USEAerial connection Speaker cushion Removing the speaker grilles Connecting the AC power leadDemo mode Placing the systemPlay Remote controlPrecautions for battery use To change the brightness of the disTo see the time display Setting the ClockTo change the time display mode To change the clock timeExtra bass X-BASS VolumeSound Control Pre-programmed equalizer SurroundTo interrupt playback Compact Disc OperationCD playback To stop playbackTo remove a MiniDisc Minidisc OperationMD playback Repeat and random play Convenient CD and MD OperationApss Auto Program Search Sys- tem Cue and reviewTo clear the programmed selections To cancel the ApmsApms Automatic Programmable Music Selector To check which tracks are programmedTime Switching the time displayChanging the display during MD playback Auto tuning TuningManual tuning Press the ON/STAND-BY button to enter the stand- by modePreset tuning Preset memory scanPTY Display ModeInformation provided by RDS Test Alarm None To stop the Aspm operation before it is complete To erase all of the contents of preset memoryAspm Auto Station Program Memory To cancel the station select operation Page If you have selected the traffic programme To manually recall the stations stored in memory To switch the displayPresetx W About the Ptyi Dynamic PTY Indicator Checking the stand-by mode settingTo cancel the EON stand-by mode MeaningWhen in the EON stand-by mode, press the EON button EON-TIAbout the TP and TA indicators TP indicator TA indicator MeaningDisc writing TOC About track numbers RecordingDifferences from tape recordings To check the remaining time available for recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing To stop recordingCD0MD Edit High /NORMAL To record without using One-Touch EditingApms recording Recording is performed as a single track Recording from the built-in radio onto a MiniDiscTo record the track number whilst record- ing Type of characters used EditingWhat the editing function can do Within 10 seconds, press the Enter button To create a disc nameTo erase a disc name Press the Enter button to enter the characterTo create a track name To erase a track nameName TOC Edit Enter Clear To change disc names and track namesTo add a character Example To change Besut to BestCombine When both tracks have a nameDivide Example MoveTo combine two non-contiguous tracks To erase tracks one at a time EraseAll Erase To erase all of the tracks at onceTimer Operation Timer playbackTimer recording To use sleep and timer playback in combi- nation Simultaneous sleep and timer op- erationTo cancel the sleep operation To use sleep and timer recording in com- binationHeadphones Using External UnitsConnecting external units Listening to sound from an exter- nal unit Manual recordingWhat is a MINIDISC? Symptom Possible cause Remedy TroubleshootingIf a problem occurs Mini Disc System LimitationsMD recording and playback Symptom Possible causeCD Playback Radio receptionError Messages When an error message is displayed, proceed as followsCare of compact discs Resetting the Microcom Maintenance PuterExternal care Specifications Memo