HP J3178A manual Snmp Communities Add or Edit Screen

If you are adding a community, the fields in this screen are blank.

If you are editing an existing community, the values for the selected community appear in the fields.

Configuring the Switch From the Console

Configurable Features

type the value for this field

use the Space bar to select values for other fields

	Figure 4-8. The SNMP Communities Add or Edit Screen
N o t e	If you choose to not restrict the use of a community to specific network
	management stations, you do not need to list the manager addresses on this
	screen. You can use this screen to just configure community names and to set
	the MIB View and Write Access for each community.
	All community names that you create using this screen can be used to access
	the switch into which the Switch Management Module is installed. Any
	management station using the correct community name may access the switch
	with the corresponding MIB View and Write Access levels.
	If you want to restrict access to one or more specific management stations for
	a given SNMP community, listing the addresses of those stations on this screen
	creates that limitation. For each SNMP Community, you can authorize up to
	ten management stations by entering their IP and/or IPX addresses into the
	Manager Address field.
	3. Enter the appropriate value in each of the above fields (use the [Tab] key
		or arrow keys to move from one field to the next).
	4.	Press [Enter], then [S] (for Save), and the new SNMP Community configu-
		ration is automatically activated.
	5.	Return to the Main Menu to access other functions.

Configuring the Switch From the Console

4-13