HP A7340-96002 manual Installing the Switch in a Rack, FC 16B Rack-Mounted Switch

Page 10

b.Turn on the power supply (flip the AC switch to “I”) when ready to supply power to the switch. The switch automatically runs POST (power on self-test) each time it is turned on.

c.If the FC 16B includes a second power supply, repeat Steps 4a and 4b for the remaining power supply.

Note Do not connect the switch to the network until the IP address is correctly set. For instructions on how to set the IP address, see “Configuring and Connecting the Switch” on page 17.

Installing the Switch in a Rack

This section provides instructions for installing the FC 16B in an HP or

Compaq/Rittal rack.

Figure 1. FC 16B Rack-Mounted Switch

4	Quick Start Guide

Image 10

Contents Quick start guide Hp surestore fc 1Gb/2Gb switch 16B Warranty Contents Specifications Revision History UpdatesRelated Publications Title Part Number Safety Guidelines Product DescriptionPackage Contents Installing the Switch as a Stand-Alone Unit Installing the Switch in a Rack FC 16B Rack-Mounted SwitchInstalling the Switch To install the switch in a rack Installing the Rear Rail-Tray Brackets Compaq/Rittal Rack Installing the Tinnerman Clips HP Rack Installing the Rubber Washers Assembling the Outer Rails HP Rack Installing Switch into an HP Rack Quick Start Guide Setup System ComponentsSFP Media Side SFP Media Side of the FC 16BPower Supply Side Power SupplySFPs Fabric Operating SystemFibre Channel Cable Connections Configuring and Connecting the Switch DescriptionTo configure the FC 16B and connect it to a fabric Gateway Address 172.17.1.1 Enter the new gateway address Quick Start Guide Setup Saving the System Configuration Files Backing up the Switch Configuration SettingsRestoring the System Configuration Settings Setting Up Speed Negotiation Setting QuickLoop Mode on PortsNext Steps Configuring Supported Devices HP Surestore Director FC-64 SwitchHP Surestore VA Diagnostics Switch Status IndicatorsLEDs on the SFP Media Side Diagnostics LEDs on the Power Supply Side Are faulty Maintenance and Diagnostic Tests Test Command Description Service and Support Additional Licenses Error MessagesGetting Support Specifications GeneralEnvironmental Dimensions Power SupplyQuick Start Guide Product Regulatory Information Germany Noise Declaration Laser Safety Declaration of Conformity Page Page Page A7340-96002