Configuration details
Configuring the Command View workstation and software
Configure the Command View workstation as explained below:
1.Ensure an ethernet LAN connects the FRS servers to the CV station. If you use a firewall, make sure it is open between the CV and FRS servers.
Important: Ensure this network is listed first in the Network Connections control panel Advanced Settings window. If you change settings in this panel, reboot the CV station so they take effect.
2.Ensure an FC SAN connection exists between the CV station and the disk array.
3.Log into the CV station and launch Command View EVA.
4.Click Agent Options>Licensing options to display the Licensing Options page.
5.Click View previously entered license keys to see if a Business Copy license is already installed. Click Cancel if you need to install the license.
6.Click Enter new license key and type or paste the license key in the Add a License dialog box. The key comes by email from the HP License
Key Retrieval website: http://h18000.www1.hp.com/products/software/softwarekeys/index.html.
7.Click Add License to save the license key. Repeat for the next license.
8.Install HP MPIO Full Featured Failover Software and Manager if you plan to use multipathing.
32HP StorageWorks EVA Fast Recovery Solution for Windows Server 2003: Administration Guide