HP Smart Update Manager (SUM) Softwareonly, Usecurrentcredential, Webupdateneeded, Useproxyserver

Parameter	Description	Possible values
SOFTWAREONLY	This is a filter switch that allows you to view	YES, NO
	only the software components required for
	installation.
	Do not use the /softwareonly parameter
	with the /romonly parameter.
USECURRENTCREDENTIAL	Enables the credentials of the local host to	YES, NO
	be used as the credentials to access the
	targets instead of providing the user name
	and password explicitly for each target.
	The assumption is that the current credentials
	are valid for the targets that are being
	accessed. (Applies to Windows operating
	systems only.)
WEBUPDATENEEDED	Instructs HP SUM to include the components	YES, NO
	from the HP FTP site (ftp://ftp.hp.com) in the
	list of possible updates.
USEPROXYSERVER	Use a proxy server (and port number) to	String value
	access the HP FTP site (ftp://ftp.hp.com).	For example, 11.22.33.44:80
USEPROXYSCRIPT	Include a proxy script to access the HP FTP	Web URL (for example,
	site (ftp://ftp.hp.com).	autoproxy.com)
DELETEINPUTFILE	Instructs HP SUM to delete the input file after	YES, NO (default)
	it has been read.
ONFAILEDDEPENDENCY	This parameter instructs HP SUM how to	OmitHost (default),
	proceed when a component has a failed	OmitComponent, Force
	dependency.
	The default of OmitHost causes the host to
	be put in a failure state, and no installation
	is attempted on it.
	OmitComponent clears the affected
	components and proceeds with any updates
	that do not have dependency failures.
	Force attempts all updates, even if they
	have dependency failures.
HOST	This parameter is the IP address or the DNS	IP address, DNS name
	name of a remote server, remote iLO NIC
	port, Virtual Connect Ethernet or Fibre
	Channel Module for c-Class BladeSystem,
	or BladeSystem OA.
	When two OAs are in an enclosure, this
	parameter is the active OA. When
	specifying the IP address, you can use either
	the IPv4 or IPv6 format.
	This parameter specifies an already defined
	group name in the HP SUM GUI.
UID	Logs in to the target hosts with your user ID.	<username>
PWD	Uses the password for the user ID specified	<password>
	in the UID.
	The password is used to log in to target
	hosts.
LOGFILENAME = "path"	Redirects the output from HP SUM or the HP	Log file name
	BladeSystem c-Class OA flash utility to a
	different directory than the default location.

32 Advanced topics