HP Smart Update Manager (SUM) Trustmode, Certlist, Xenamelist, HPQLA2X00FORCE, Oauid, Oapwd

Parameter Description Possible values

access granted to local users. (Applies to Linux PSP only.)

TRUSTMODE	HP Systems Management Homepage uses
	this parameter to set up the trust relationship
	mode. (Applies to Linux PSP only.)

CERTLIST	Enables you to provide a list of certificate
	files or servers where certificates can be
	obtained for trust relationships for the HP
	Systems Management Homepage. (Applies
	to Linux PSP only.)
XENAMELIST	Enables you to provide a list of servers,
	separated by semicolons, for trust
	relationships for the HP Systems
	Management Homepage. (Applies to Linux
	PSP only.)
	This parameter is valid only if the
	TRUSTMODE parameter is set to
	TrustByName. (Applies to Linux PSP only.)
HPQLA2X00FO	The hp_qla2x00 QLogic Fibre Channel
	Driver uses this parameter to determine the
	failover mode to use. (Applies to Linux PSP
	only.)
HPQLA2X00FORCE	The hp_qla2x00 QLogic Fibre Channel
	Driver uses this parameter to determine
	whether to skip detection of third-party
	storage. (Applies to Linux PSP only.)
OAUID	Provides the user name credentials for the
	OA associated with VC. You must define a
	value of these variables before the HOST
	variable in the [TARGETS] section. This
	parameter applies only for VC firmware.
	You can also use OAUSER or OAUSERNAME.
OAPWD	Provides the password credentials for the
	OA associated with VC. You must define a
	value of these variables before the HOST
	variable in the [TARGETS] section. This
	parameter applies only for VC firmware.
	You can also use OAPASSWORD.

•TrustByCert—If you use this value, you must define the CERTLIST parameter to enable access to the server.

•TrustByName—If you use this value, you must define the

XENAMELIST.

•TrustByAll—HP does not recommend using this value because of possible negative security consequences.

CAUTION: The accepted values are case-sensitive and must be capitalized as shown. Failure to do so prevents the trust relationship from being set up properly during installation and might affect access to the web server.

Certificate file name or Server DNS name

Server DNS name

•SinglePath

•SecurePath

•QLogicFailure

NOTE: No default value

Y, N (default)

User can define the OAUID variable multiple times before each HOST variable.

User can define OAPWD variable multiple times before each HOST variable.

36 Advanced topics