HP Serviceguard Storage Management Suite for VERITAS Required Software, Software Depot Content

Page 24

Table 3 Required and Recommended Patches (continued)

PHKL_40377

No

PHKL_41005

No

PHKL_41083

Yes

PHKL_41087

No

PHKL_41442

Yes

Required Software

In addition to the recommended patches listed in Table 3, the software products listed in Table 4 are required for use with VxFS 5.1 SP1 and VxVM 5.1 SP1 installations. You can download these products from http://www.software.hp.com.

Table 4 Required Software Products

Product Name: Revision

Ignite-UX C.7.12 or later

BaseLVM B.11.31.1104 or later

IMPORTANT: Ignite-UX version C.7.12 does not support archiving of disk groups with a disk group version of 160. Archive creation (when disk groups with a disk group version of 160 are present on the system) does not display any error/warning indicating restore operation will fail.

For more information, refer to the “Known Problems and Workarounds” section in the Veritas Volume Manager 5.1 SP1 Release Notes.

Required Packages for Veritas Enterprise Administrator

To use the VEA with VxVM 5.1 SP1, the following software products are required:

Veritas Enterprise Administrator Service (VRTSob)

Veritas Enterprise Administrator (VRTSobgui)

The minimum memory requirement for the VEA client is 128 MB. The software products mentioned in this section are installed as part of VxVM.

Software Depot Content

Table 5 and Table 6 lists the composition of the Base-VxFS-51 and Base-VxVM-51 bundles.

Table 5 Base-VxFS-51 Bundle Components

Package

Description

Base-VxFS-51

Veritas File System Bundle 5.1 for HP-UX

Base-VxFS-51.VRTSvlic

Symantec License Utilities

Base-VxFS-51.VRTSvxfs

VERITAS File System

Table 6 Base-VxVM-51 Bundle Components

Package

Description

Base-VxVM-51

Base VERITAS Volume Manager Bundle 5.1 for HP-UX

Base-VxVM-51.VRTSaslapm

Array Support Libraries and Array Policy Modules for Veritas Volume Manager

24 System Requirements

Image 24
Contents Veritas 5.1 SP1 Installation Guide Page Contents Setting up the Veritas 5.1 SP1 Products Upgrading from Previous Versions of VxFS to VxFS 5.1 SP1Post Upgrade Tasks Files Added and Modified After VxFS InstallationRemoving Veritas 5.1 SP1 Products About this Document Intended AudienceDocument Organization Typographic ConventionsRelated Information Technical SupportHP Business Support Center HP Welcomes Your Comments Volume Managers Supported on HP-UX 11i Veritas Volume Manager VxVMIntroduction OverviewVxVM Features Veritas Volume Manager VxVM Introduction # vxddladm set namingscheme=osn mode=legacy # vxddladm set namingscheme=osn mode=newVxVM 5.1 SP1 on HP-UX 11i Architecture of VxVM VxVM Daemons VxVM ObjectsVolume Layouts in VxVM VxVM Storage LayoutsFile Systems Supported on HP-UX 11i VxVM InterfacesSupported File Systems on HP-UX 11i v VxFS Features Veritas File System VxFSVeritas File System VxFS Introduction VxFS 5.1 SP1 on HP-UX 11i Architecture of VxFS Extent Based Allocation System Requirements Software DependencyOS Version Patch RequirementsRequired Packages for Veritas Enterprise Administrator Software Depot ContentRequired Software License Bundles Base-VxTools-51 Bundle ComponentsVxFS-SDK-51 Bundle Components B9117EB Bundle ComponentsDisk Space Requirements Disk Space Requirements for VxFS 5.1 SP1Disk Space Requirements for VxVM 5.1 SP1 Disk Space Requirements for CVMInstalling the Veritas 5.1 SP1 Products Mounting the HP Serviceguard Storage Management Suite MediaInstalling Veritas 5.1 SP1 Products Installing VxFS 5.1 SP1 Installing Base-VxFS-51# swinstall -x autoreboot=true -s depot-path Base-VxFS-51 # swinstall -x autoreboot=true -s depot-pathInstalling VxVM 5.1 SP1 Installing HP OnlineJFS B3929HBInstalling Base-VxVM-51 Installing Full VxVM B9116EB # swinstall -x autoreboot=true -s depot-path Base-VxVM-51# swintall -x autoreboot=true -s depot-path # swinstall -x autoreboot=true -s depot-path B9116EBInstalling CVM B9117EB on HP-UX 11i Swinstall -x autoreboot=true -s -depotsource B9117EBPreparing the Ignite-UX Server # swverify B9116EBCold-Installing the Client Create the configuration file for the VxVM 5.1 SP1 depotConfirming the Client # swreg -l depot @ /var/depots/myhpuxdepot Page Setting up the Veritas 5.1 SP1 Products Configuring Your System after the InstallationConverting to a VxVM Root Disk # vxvol -g diskgroup startallStarting and Enabling the Configuration Daemon Starting the Volume I/O Daemon Enabling the Intelligent Storage Provisioning FeatureEnabling Cluster Support in VxVM Configuring New Shared Disks Verifying Existing Shared DisksConverting Existing VxVM Disk Groups to Shared Disk Groups Upgrading in a Clustered Environment with FastResync# vxdg -s list # vxdg listSetting Up VxVM 5.1 SP1 Initializing VxVM Using the vxinstall UtilityMoving Disks Under VxVM Control # insf -C diskSetting Up a Veritas Enterprise Administrator Server # vxdisk scandisks# vxdiskadm # /opt/VRTSob/bin/vxsvcctrl statusSetting up and Managing VxFS 5.1 SP1 Setting Up a Veritas Enterprise Administrator ClientCreating a VxFS File System Identifying the Type of File SystemSetting Environment Variables Cluster Environment RequirementsMounting a VxFS File System Displaying Information on Mounted File System# vxdg bootdg # vxupgrade -n 3 dirname # vxupgrade -n 4 dirnameUpgrading from Previous Versions of VxFS to VxFS 5.1 SP1 # bdf# vxupgrade -n 5 mountpoint # vxupgrade -n 5 mountpoint # vxupgrade -n 6 mountpoint# opt/VRTS/bin/vxfsconvert volname # fsck -F vxfs -y -o full volname# vxupgrade -n 6 mountpoint # vxupgrade -n 7 mountpoint # /opt/VRTS/bin/vxfsconvert volname# bdf # vxupgrade -n 7 mountpoint # vxupgrade -n 6 mountpoint # vxupgrade -n 7 mountpoint # vxupgrade -n 7 mountpoint # vxupgrade -n 8 mountpoint Upgrading from Previous Versions of VxVM to VxVM 5.1 SP1 Determining VxVM Disk Group VersionVxVM Disk Group Version Native Multipathing with Veritas Volume Manager # vxdg upgrade diskgroup# vxdg list diskgroup # vxvol -g diskgroup stopallVxVM vxddladm Info V-5-1-0 Please reboot the system # vxddladm rmforeign blockdir=/dev/disk chardir=/dev/rdiskFollowing messages are displayed # swinstall -x autoreboot=true -s depotpath Base-VxVM-51 # swinstall -x autoreboot=true -s depotpath Base-VxVM-51 # swinstall -x autoreboot=true Base-VxVM-51 # swinstall -x autoreboot=true Base-VxVM-51 Dmplunretrytimeout Robustness RecommendationsRobustness Recommendations Post Upgrade Tasks Optional Configuration StepsUpgrading Disk Layout Versions Upgrading VxFS Disk Layout VersionsUsing the vxfsconvert Command Using the vxupgrade CommandUpgrading the VxVM Cluster Protocol Version Requirements for Upgrading to Disk Layout VersionSetting the Default Disk Group Upgrading VxVM Disk Group VersionsUpdating Variables Upgrading the Array Support LibraryConverting from QuickLog to Multi-Volume Support Moving VxVM Volumes to LVM Volumes Removing Veritas 5.1 SP1 ProductsRemoving VxVM Removing Plexes Removing VxFS Removing the Veritas Enterprise Administrator VEA Client # swremove -x autoreboot=true B9117EBRemoving CVM # /opt/VRTS/bin/vxsvcctrl stopFiles Added and Modified After VxFS Installation Files Added After VxFS InstallationFiles Modified After VxFS Installation Etc/MANPATH5900-1514
Related manuals
Manual 12 pages 49.03 Kb