Installing the 5.1 SP1 Veritas software updates Veritas File System 5.0. After installing the 5.1 SP1 version of Veritas File System, to revert to the 5.0 version, you must remove the 5.1 SP1 version and then
To Upgrade from VxVM 5.0 on
To upgrade from VxVM 5.1 SP1 on
1.Stop activity to all VxVM volumes. For example, stop applications such as databases that access the volumes, and unmount any file systems that have been created on the volumes.
2.Convert the VxVM root device volumes into LVM root device volumes.
3.Upgrade from
11i v3, see the
4.If patches to VxVM 5.1 SP1 on
5.Install the VxVm 5.1 SP1 package.
# swinstall –x autoreboot=true Base-VxVM-51
Upon successful completion of the upgrade, VxVM 5.0 (for
5.1SP1 (for
NOTE: During the OS upgrade, the following errors will be reported. However these errors can be ignored and the OS upgrade will complete successfully.
ERROR: A later revision (one with a higher revision number) of fileset
ERROR: A later revision (one with a higher revision number) of fileset
Alternatively you can upgrade from VxVM 5.0 on
To upgrade to VxVM 5.1 SP1 on
To upgrade to VxVM 5.1 SP1 on
11i v2, complete the following steps:
1.Copy the depot to a depot server.
2.Copy VxVM 5.1 SP1 on HPUX 11i v3 into the ignite depot using the swcopy command.
3.Stop activity to all VxVM volumes. For example, stop any applications such as databases that access the volumes, and unmount any file systems that have been created on the volumes.
4.Remove VxVM 5.0
5.Upgrade from
11i v3, see the
After the OS upgrade is complete, VxVM 5.1 SP1 will be installed. Upon successful completion of the upgrade, disk groups created in VxVM 5.0 for
Upgrading from VxVM 5.0 on