HP UX Auto Port Aggregation (APA) Software manual Lanconfig.ascii File

	to choose the group capability for link aggregates. Ports
	going to different link aggregates should have different
	group capabilities.
	The default group capability is 5.
HP_APAPORT_INTERFACE_NAME	Name of physical interface. For example, lan0 and lan1.
HP_APAPORT_KEY	For LACP_AUTO only. An integer value that determines
	which network physical ports can be aggregated into a
	common LACP link aggregate. Set the key to be the same
	for all network physical ports. The key must match the key
	of the desired aggregate that the user wants the port to
	join. This value is set in the /etc/rc.config.d/
	hp_apaconf file. “Configuring a Link Aggregate”
	(page 36) describes how to choose the key.
	The default administrative key is 0.
HP_APAPORT_PRIORITY	Set the port priority for the port. The port priority
	determines which port in a link aggregate will be the
	interface when the link aggregate is set to Hot Standby
	mode (HP_APA_HOT_STANDBY=on).
	The default port priority is 0.
HP_APAPORT_SYSTEM_PRIORITY	For LACP_AUTO only. Set the port system priority for the
	port specified by HP_APAPORT_INTERFACE_NAME. The
	system priority gives control to the system to resolve
	waiting ports to be added in a link aggregate.
	The default system priority is 0.

lanconfig.ascii File

Example B-1shows a sample /etc/lanmon/lanconfig.ascii ASCII configuration file. This file contains configuration information that LAN Monitor uses for failover groups.

100 HP APA Configuration Files