◆Remote Control Operation
Function-Remote control
Note:
•Don't drop the remote control.
•Don't place the remote control in a location exposed to direct sunlight.
•When the unit is restarted after stopped, it will automatically resume its last running mode, and the outdoor unit will start there after.
TEMP+ TEMP- Button:
Under the COOL, DRY, FAN or HEAT mode, press these two buttons could set the temperature, the temp. setting range is 60.8°F
FAN SPEED Button:
When the unit starts up, under the AUTO, COOL, FAN or HEAT mode, press this button and select Auto fan, Low fan, Middle fan, High fan. At DRY mode, the fan speed runs at Low fan speed. The FAN SPEED can be memorized under various modes.
SLEEP Button:
Under COOL, DRY & HEAT mode, press the button once to start the SLEEP function, when pressed again, it will stop.
MODE Button:
When the unit is turned on, press this button. The AUTO, COOL, DRY, FAN or HEAT mode can then be selected.
CLOCK Button:
When pressing this button once, the icon of CLOCK will flash, and can be adjusted. At CLOCK adjustment, press the TIME+ once, the ones placed on the minute will be increased 1, and continuously press 1 sec above, the tens place on the minute will be increased 1 in every half second. When pressing the
- 5 -