●Print density. For increased print density, select a higher number. For decreased print density, select a lower number.
●EconoMode. Turn EconoMode on when you are printing average print jobs. EconoMode is a feature that allows the product to use less toner per page. Selecting this option might extend the life of the toner supply and might reduce cost per page. However, it reduces print quality. The printed image is lighter, but it is adequate for printing drafts or proofs. HP does not recommend
NOTE: You must click Apply before the changes take effect.
Paper Types
Use these options to configure print modes that correspond to the various media types. To reset all modes to factory defaults, select Restore modes.
NOTE: You must click Apply before your changes take effect.
System Setup
Use these system settings to configure miscellaneous print settings. These settings are not available on the control panel.
NOTE: You must click Apply before your changes take effect.
Troubleshooting
During the printing process, paper, toner and dust particles can accumulate inside the product. Over time, this buildup can cause
Network Settings
The system administrator can use this tab to control the
Shop for Supplies
This button, at the top of each page, links to a Web site where you can order replacement supplies. You must have Internet access to use this feature.
Other Links
This section contains links that connect you to the Internet. You must have Internet access to use any of these links. If you use a
ENWW | Use the HP ToolboxFX software (HP LaserJet P2050 Series Printers only) 55 |