HP Power manual When an error code or error messages appears…, Error Indications in this printer

Page 13

3. Troubleshooting

3-2 When an error code or error messages appears…

If an error code appear on the operation panel, first check the following tables for cause of the trouble and then perform the corresponding procedure. For more detailed information, refer to the Instruction Handbook for your copier as well as the Instruction Handbook for any optional equipment that is installed in your machine.

Error Indications in this printer

If “Prt” is displayed and the Memory Overflow/Data Error indicator flashes while the machine is in the copier mode, an error has occurred with the printer functions of this machine. Press the Printer key and check the cause of the error. Refer to the following tables for the corresponding error code and appropriate correction procedure.

Error code	Procedure

E01	A paper jam has occurred. Remove the jammed paper.

E02	The drawer has run out of paper or a paper jam has occurred. Add paper or remove the jammed paper, as appropriate.

E03	One or both drawers are not set properly in the printer. Insert both drawers securely.

E04	The size of paper selected for printing does not match the size of paper in the drawer. Replace the paper in the drawer with
	that of the correct size.
	* If you want to force-print onto the current size of paper, press the Start [GO] key. If you want to switch to and print from a
	different drawer, press the Paper Select key until the desired drawer is selected. If you want to cancel the printing operation
	completely, press the Stop/Reset key.

E05	The drawer has run out of paper. Add paper.

E06	One of the covers is open. Close the covers securely.

E07	Differ from actual size. Check drawer sizesetting.

E25	The amount of paper stacked in the Inner tray has exceeded the acceptable capacity. Remove all paper from the Inner tray
	and then press the Start [GO] key to continue printing.
	* If you want to cancel the printing operation completely, press the Stop/Reset key.

E30	Trouble has occurred within the printer. Contact your service representative or an authorized service center.

6

Image 13

Contents Instruction Handbook Trademark Information Page Iii About the On-Line Manual About this Instruction HandbookGetting connected Table of contents Preparations AccessoriesRequired items Name of parts main bodyMeaning Name of parts operation panelInstalling the software Connecting the printer cableSet-up Network TCP/IP settings Canceling printing TroubleshootingError Indications in this printer When an error code or error messages appears…Error code Procedure Troubleshooting Problem Check point Procedure Reference Basic troubleshooting chartCPU SpecificationsManuel D’INSTRUCTIONS Informations concernant les marques déposées IBM Program License Agreement Iii Au sujet du manuel dassistance en ligne Au sujet de ce manuel dinstructionsLes connexions Table des matières InstallationPréparatifs DépannagePréparatifs AccessoiresPièces nécessaires Nomenclature corps principalIndication Signification Nomenclature panneau de commandeInstallation du logiciel InstallationRaccordement du câble ’imprimante Indiquera alors P24 réglage de marche/arrêt de Dhcp Réglages de réseau Protocole TCP/IPAnnuler une impression DépannageIndications derreur dans cette imprimante Lorsqu’un code d’erreur ou un message d’erreur apparaît…Procédure Dépannage Problème Point à vérifier Procédure Tableau de dépannage de baseSpécifications Manual DE Instrucciones Información sobre las marcas IBM Program License Agreement Iii Acerca del manual en línea Acerca del manual de instruccionesConexión PáginaPreparación IndiceInstalación Localización de averíasAccesorios PreparaciónItems requeridos Nombres de las piezas cuerpo principalSignificado Nombres de las piezas tablero de controlesConexión del cable de Impresora InstalaciónInstalación de los programas Ajustes de red TCP/IP Localización de averías Cancelación de la impresiónIndicaciones de error de esta impresora Cuando aparece un código de error o un mensaje de error…Procedimiento Localización de averías Cuadro de localización de averías básicas Problema Punto a inspeccionar ProcedimientoEspecificaciones