5.Select On, then press OK.
Paper does not feed into the printer correctly.
Solution
●Make sure that the
●There may be too much paper loaded in the In tray. Remove some paper and try printing again.
●If sheets of photo paper stick together, try loading one sheet at a time.
●If you are using the printer in an extremely high or low humidity environment, insert the paper as far as it will go into the In tray, and load one sheet of photo paper at a time.
●If you are using photo paper that is curled, place the paper in a plastic bag and gently bend it in the opposite direction of the curl until the paper lies flat. If the problem persists, use paper that is not curled. For information about proper storage and handling of photo paper, see Maintaining the quality of photo paper.
●The paper may be too thin or too thick. Try using
The photo printed at an angle or is off-center.
Solution
●The paper may not be loaded correctly. Reload the paper, making sure that the paper is correctly oriented in the In tray and that the
●The print cartridge may need to be aligned. For more information, see Aligning the print cartridge.
No page came out of the printer.
Solution
●The printer may need attention. Read the printer screen for instructions.
●The power may be off or there may be a loose connection. Make sure that the power is on and the power cord is securely connected. If you are using battery power, make sure the battery is correctly installed.
●You may not have any paper in the In tray. Check that paper is loaded correctly in the In tray. For
●The paper may have jammed while printing. See the following section for instructions on clearing a paper jam.
HP Photosmart 330 series User's Guide | 43 |