HP Designjet 30/90/130 Printer series – Quick Reference Guide
How Do I Replace Printheads?
If one of the printhead icons on the front panel (see page 63) is flashing, the corresponding printhead has failed or needs attention. Check that the printhead is properly seated, and clean the printhead contacts (see page 27). If the problem persists, replace the printhead.
1.Open the front hinged flap at the right of the printer.
2.Open the second (back) part of the flap and lift it back fully. The print carriage will move to the left and then back to the right. Wait for it to stop.
English |
3.Pull the printhead cover up and towards you, so that the hook at the front unlatches itself, and then push the whole cover back, so that the printheads are exposed.
4.For each printhead that needs to be replaced:
31