HP 130 manual Problem is Paper is Not Taken from the Input Tray

Page 55

English

HP Designjet 30/90/130 Printer series – Quick Reference Guide

The Problem is Paper is Not Taken from the Input Tray

If the printer does not take paper from the input tray…

1.Check that you specified the paper source correctly in your print job.

2.Check that there is paper in the tray and that it was loaded correctly:

•If you are using the 30 Printer series, see “How Do I Load Paper in the Input Tray? (30 Printer series)” on page 8.

•If you are using the 90/130 Printer series, see “How Do I Load Paper in the Input Tray? (90/130 Printer series)” on page 9.

Try removing the paper from the tray and reloading it.

3.Make sure that there is not too much paper in the tray. You should not try to load more than 70 sheets of plain paper, 50 sheets of coated paper, or 20 sheets of glossy paper in the tray (for more details, see the HP Designjet Driver and Documentation CD).

Note that the upper limit marked in the tray of certain models of printer (see illustration below) is a theoretical maximum and may not apply to the paper you are using.

4.Check that the tray is supported by a flat and stable surface.

5.Paper loading failure can be caused by curled or damaged paper. Keep paper in its box when not using it to avoid this kind of problem.

54

Image 55

Contents HP Designjet 30/90/130 series How Do I…? HP Designjet 30/90/130 Printer series Quick Reference GuideTell Me About… More informationHow Do I Perform a Color Calibration? How Do I Load Sheets of Paper? General Guidance How Do I Load Sheets of Paper? General Guidance How Do I Unload Paper from the Front Path? How Do I Load Paper Using the Front Path?How Do I Load Paper Using the Front Path? How Do I Load Paper in the Input Tray? 30 Printer series How Do I Load Paper in the Input Tray? 90/130 Printer series How Do I Load Paper in the Input Tray? 90/130 How Do I Load Sheet Paper Using the Rear Path? Sheet paper Roll paper How Do I Load a Roll of Paper? 90 Printer series How Do I Load a Roll of Paper? 90 Printer series How Do I Unload a Roll of Paper? 90 Printer series How Do I Load a Roll of Paper? 130 Printer series Sheet paper Roll paper How Do I Unload a Roll of Paper? 130 Printer series How Do I Print on Large Sheets? 30 Printer series How Do I Print on Large Sheets? 90 Printer series Down How Do I Print on Large Sheets? 130 Printer series Closed Front or How Do I Select Paper Type? How Do I Select Paper Type? How Do I Replace Ink Cartridges? How Do I Clean a Printhead? How Do I Clean a Printhead? How Do I Clean a Printhead? How Do I Clean a Printhead? How Do I Replace Printheads? How Do I Replace Printheads? Push the printhead gently into place, so that it is secure How Do I Replace Printheads? Select Maintain printheads, then Align printheads How Do I Align Printheads?Windows 98 and Windows ME How Do I Access the Printer Driver?Windows XP WindowsSoft proofing optional Configuring Photoshop’s color settingsHow Do I Print from Adobe Photoshop? Opening the RGB image with PhotoshopPrinting your image Mac OS driver access the printer optionsSelect Properties Windows driver access the printer optionsHow Do I Use HP Designjet System Maintenance? How Do I Test My Printer? How Do I Print the Printer Information Pages?Problem is the Input Tray Will Not Fit Properly Rear path Problem is a Sheet of Paper is Jammed 30 Printer seriesProblem is a Sheet of Paper is Jammed 90/130 Printer series Problem is a Roll of Paper is Jammed Problem is there is a Printhead Failure Problem is there is a Printhead Failure Problem is there is a Printhead Failure Problem is there is a Printhead Failure Problem is Bad Color Problem is Poor Print Quality Checking network connectivity Problem is a Partial or Blank Image is PrintedChecking your print job is valid Problem is a Partial or Blank Image…Problem is Paper is Not Taken from the Input Tray Problem is the Printer Rejects Paper from Front Path or Tray Problem is the Printer Takes Two or More Sheets At Once Problem is Images are Low Resolution Problem is the Printer has Not Received the Job Problem is a Flashing Tool Icon in the Front Panel Pattern Explanation Solution Problem is Something Else General Guidance Tell Me About the Front Panel Tell Me About the Icons on the Front Panel When off NormalTell Me About the Icons on the Front Panel Tell Me About Hardware Error Information Tell Me About Color Calibration Tell Me About HP Designjet System Maintenance …see the HP Designjet Driver and Documentation CD Tell Me More About My PrinterExtent of limited warranty HP Limited Warranty StatementHP Designjet 30/90/130 Printer series English Limitations of liability Limitations of warrantyLocal law Revision February 10th Regulatory Model Number Regulatory NoticesElectro-magnetic compatibility EMC English English Declaration of Conformity Q6656-90011

Related manuals

Manual 4 pages 59.66 Kb

Manual 2 pages 5.05 Kb

Manual 2 pages 24.01 Kb