HP 6631B, 6633B, 6632B, 6634B manual Safety Considerations, Options and Accessories

Page 18

2 – General Information

Safety Considerations

This dc source is a Safety Class 1 instrument, which means it has a protective earth terminal. That terminal must be connected to earth ground through a power source equipped with a ground receptacle. Refer to the Safety Summary page at the beginning of this guide for general safety information. Before installation or operation, check the dc source and review this guide for safety warnings and instructions. Safety warnings for specific procedures are located at appropriate places in the guide.

Options and Accessories

 

Table 2-1. Options

Option

Description

100

87− 106 Vac, 47− 63 Hz

220

191− 233 Vac, 47− 63 Hz

230

207− 253 Vac, 47− 63 Hz

020

Front panel output binding posts

760

Isolation and polarity reversal relays (not available on HP 6631B)

1CM

Rack mount kit (HP p/n 5062-3974)

1CP

Rack mount kit with handles (HP p/n 5062-3975)

 

Accessory Rack slide kit )HP p/n 1494-0060)

910

Service manual with extra operating manuals

1Support rails are required when rack mounting units. Use E3663A support rails for HP rack cabinets, and E3664A for non-HP rack cabinets.

Table 2-2. Accessories

 

Item

 

HP Part Number

HP-IB cables

 

 

1.0 meter (3.3 ft)

 

10833A

2.0 meters (6.6 ft)

 

10833B

4.0 meters (13.2 ft)

 

10833C

0.5 meters (1.6 ft)

 

10833D

RS-232 cable

 

34398A

(9-pin F to 9-pin F, 2.5 meter, null modem/printer cable

 

 

with one 9-pin M to 25-pin F adapter

 

 

RS-232 adapter kit (contains 4 adapters)

 

34399A

9-pin M to 25-pin M for pc or printer

 

 

9-pin M to 25-pin M for pc or printer

 

 

9-pin M to 25-pin M for modem

 

 

9-pin M to 9-pin M for modem

 

 

18

Image 18
Contents USER’S Guide Warranty Information CertificationSafety Summary GeneralSafety Symbols Declaration EMCAcoustic Noise Information Printing HistoryTable of Contents Entry Keys Examples of Front Panel Programming Specifications Supplemental CharacteristicsPerforming the Calibration Procedure IntroductionConvenient bench-top features Flexible system featuresQuick Reference Front Panel At a Glance Front Panel Number Entry Use the Function keys and Entry keys to enter a new valueFront Panel Annunciators Immediate Action KeysFront Panel Menus At a Glance Scpi Programming Commands At a Glance ABORt SENSe CALibrateRear Panel At a Glance Use the front panel Address menu toPage General Information Document OrientationGetting Started Map Accessories Safety ConsiderationsOptions and Accessories OptionsDescription Output Characteristic Inspection InstallationCleaning Damage Packaging MaterialLocation Bench OperationRack Mounting Input Connections Connect the Power CordWire Considerations Output ConnectionsRemote Sense Connections Voltage DropsMultiple Load Connections Sense Leads Remote Sense ConnectionsOVP Considerations StabilityPage FLT/INH DIGital I/O Connector Digital I/O ConnectionsFLT/INH Examples RS-232 Interface Controller ConnectionsHP-IB Interface Pin Input/Output DescriptionUsing the Keypad Turn-On CheckoutIntroduction Checkout Programming Values Checkout ProcedureProcedure Display Explanation Model Voltage OV Prot CurrentProcedure Display Explanation Press 5, EnterError Messages Case of TroubleLine Fuse Front panel Operation Front Panel DescriptionLine System Keys Function Keys Display AnnunciatorsRotary Control Entry KeysDisplay Command Function System KeysFunction Keys Immediate Action KeysScrolling Keys High Metering KeysDisplay Measurement LOWOC OT OV RI FS Output Control KeysRST Voltprot valueEntry Keys Entry KeysExamples of Front Panel Programming Setting the Output Voltage and CurrentEnable the output Set the output voltageQuerying and Clearing Output Protection Making Front Panel MeasurementsAction Use the Meter menu for making front panel measurements Currrang AutoCurrdet Acdc To configure the Ridfi mode of the port, proceed as follows To configure the Digio mode of the port, proceed as followsProgramming the Digital Output Port Programming the Output Relay option 760 only Setting the HP-IB Address and RS-232 ParametersConfigure the RS-232 interface as follows Set the HP-IB address as followsSave an operating state in location 1 as follows Select the power-on state of the dc source as followsSaving and Recalling Operating States Recall a saved state as followsPage Specifications Supplemental Characteristics Table A-2. Supplemental CharacteristicsParameter HP 66332A Command ProcessingINH/FLT Characteristics Dynamic MeasurementNet weight Digital I/O CharacteristicsDimensions Shipping weightEquipment Required Test SetupVerification and Calibration Table B-1. Equipment RequiredFigure B-1. Verification & Calibration Test Setup Performing the Verification TestsCurrent Programming and Measurement Accuracy Turn-On CheckoutVoltage Programming and Measurement Accuracy Table B-2. Verification Programming ValuesCurrent Measurement Low Range Current Sink MeasurementCurrrang LOW Current Measurement Low Range Table B- 3. Verification Test Record for HP 6631BCurrent Programming and Measurement High Range Current Sink MeasurementTable B- 5. Verification Test Record for HP 6633B Table B- 6. Verification Test Record for HP 6634BPerforming the Calibration Procedure Front Panel Calibration MenuVoltage Programming and Measurement Calibration Enable Calibration ModeFront Panel Calibration Overvoltage Protection CalibrationCurrent Programming and High-Range Measurement Calibration Negative Current Programming CalibrationLow-Range Current Measurement Calibration Error Meaning Calibration Error MessagesTable B- 7. HP-IB Calibration Error Messages AC Current Measurement Calibration HP 66332A onlyChanging the Calibration Password Calibration Over the HP-IBCalpass Page Error Messages Error Number ListTable C-1. Error Numbers Error Messages Error Messages C Page Configure the Power Transformer Line Voltage ConversionOpen the Unit Install the Correct Line Fuse Close the UnitIndex Index Index Asia Pacific United States of America EuropeJapan Latin AmericaManual Updates
Related manuals
Manual 94 pages 1.46 Kb

6631B, 6633B, 6634B, 6632B specifications

The HP 6632B, 6634B, 6612B, and 6633B are high-performance programmable power supplies that have gained prominence in various testing and measurement applications. These models are part of the HP 6000 series, which is renowned for its reliability and versatility in providing precision power supply solutions.

The HP 6632B offers a dual-output capability, delivering up to 32 volts and 3 amps per channel. It is designed for applications requiring stable and accurate voltage and current supplies. With features like overvoltage protection and short-circuit protection, it ensures the safety of both the device under test and the power supply itself. The programmable voltage and current settings allow operators to automate their testing procedures, increasing efficiency.

The HP 6634B takes performance a step further with multiple outputs, providing up to 32 volts and 5 amps per channel. This model is particularly suited for applications requiring higher current, especially in battery testing and device characterization. The ability to program the device remotely adds an extra layer of usability, making it ideal for integration into automated testing environments.

The HP 6612B model is tailored for users who require a compact and portable power supply solution. It delivers up to 20 volts and 2 amps. Despite its smaller size, it retains essential features like programmable settings and fast transient response, making it suitable for both educational purposes and field testing scenarios.

For users looking for a versatile, multi-channel solution, the HP 6633B presents itself as an excellent choice. This model offers up to 32 volts and 5 amps across multiple outputs. It supports a wide range of programmable features and has an intuitive interface, making it user-friendly for both beginners and experienced engineers. The robust design of the 6633B ensures reliable performance in demanding environments.

All four models utilize advanced linear power supply technology that minimizes ripple and noise, which is critical for sensitive electronic components. Together, these power supplies provide professionals in research, manufacturing, and testing with the precision they need for their experiments and product developments. The combination of programmability, safety features, and high-performance specifications makes the HP 6632B, 6634B, 6612B, and 6633B essential tools for electronic engineers and technicians.