HP 6633B, 6632B, 6631B, 6634B manual Output Control Keys, Rst, Oc Ot Ov Ri Fs, Voltprot value

Protect

Shift

Shift

5 - Front Panel Operation

Output Control Keys

Output control keys control the output functions of the dc source.

Voltage	Press this key to access the voltage menu.
	Display	Command Function
	VOLT <value>	Sets the output voltage
Current	Press this key to access the current menu.
	Display	Command Function
	CURR <value>	Sets the output current
Output	Press this key to access the output menu list.
	Display	Command Function
	*RST	Places the dc source in the factory-default state
	PON:STATE <char>	Select the power-on state command (RST or RCL0)1
	RI <char>	Sets the remote inhibit mode (LATCHING, LIVE, or OFF)1
	DFI <char>	Sets the discrete fault indicator state (ON or OFF)
	DFI:SOUR <char>	Selects the DFI source (QUES, OPER, ESB, RQS, or OFF)2
	PORT <char>	Sets the output port functions (RIDFI or DIGIO)1
	DIGIO <char>	Sets and reads the I/O port value (0 through 7)
	RELAY <char>	Set relay state independent of output (``ON'' or ``OFF'')
	REL:POL <char>	Set relay polarity (``NORM'' or ``REV'').
	PROT:DLY <value>	Sets the output protection delay in seconds

OV

Cal

Press this key to display protection status.

Display	Command Function
OC OT OV RI FS	Status of the protection features (example shows all tripped)
-- -- -- -- --	Status of the protection features (example shows none
	tripped)

Press this key to access the overvoltage protection menu.

Display	Command Function
VOLT:PROT <value>	Sets overvoltage protection level

This key accesses the calibration menu (Refer to Appendix B to calibrate your dc source).

Notes:

1These parameters are stored in non-volatile memory

2These status summary bits are explained in chapter 3 of the Programming Guide value = a numeric value

char = a character string parameter

Use p	and	q	to scroll through the menu commands.
Use ã	and	ä	to scroll through the menu parameters.
Use á	and	â	to select a digit in a numeric entry field.

40