HP 6634B Saving and Recalling Operating States, Save an operating state in location 1 as follows

Page 47

Front Panel Operation - 5

7 - Saving and Recalling Operating States

NOTE: This capability is only available when the unit is set to the SCPI programming language.

You can save up to 4 states (from location 0 to location 3) in non-volatile memory and recall them from the front panel. All programmable settings are saved.

Save an operating state in location 1 as follows:

Action

Display

1.Set the instrument to the operating state that you want to save.

2. Save this state to location 1. Press Save, 1, Enter.*SAV 1

Recall a saved state as follows:

 

Action

Display

1.

Recall the state saved in location 1 by pressing Recall, 1, Enter

*RCL 1

Select the power-on state of the dc source as follows:

Action

Display

1. On the Function keypad, press Output, and scroll through the Output

PON:STATE RST

menu until you get to the PON state command.

 

2.Use the ã and ä keys to select either RST or RCL0. RST sets the power- on state of the unit as defined by the *RST command. RCL0 sets the power-on state of the unit to the state saved in *RCL location 0.

Clear the non-volatile memory of the dc source as follows:

 

Action

Display

1.

On the Function keypad, press Output, Enter. This returns the unit to

*RST

 

 

the factory-default settings.

 

 

2.

Save these settings to location 1. Press Save, 1, Enter.

*SAV

1

3.

Repeat step #2 for memory locations 2 through 4..

*SAV

2

 

 

*SAV 3

 

 

*SAV 4

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents USER’S Guide Certification Warranty InformationGeneral Safety SummarySafety Symbols EMC DeclarationPrinting History Acoustic Noise InformationTable of Contents Introduction Specifications Supplemental CharacteristicsPerforming the Calibration Procedure Entry Keys Examples of Front Panel ProgrammingQuick Reference Convenient bench-top featuresFlexible system features Front Panel At a Glance Use the Function keys and Entry keys to enter a new value Front Panel Number EntryImmediate Action Keys Front Panel AnnunciatorsFront Panel Menus At a Glance ABORt SENSe CALibrate Scpi Programming Commands At a GlanceUse the front panel Address menu to Rear Panel At a GlancePage Getting Started Map General InformationDocument Orientation Options Safety ConsiderationsOptions and Accessories AccessoriesDescription Output Characteristic Damage Packaging Material InstallationCleaning InspectionRack Mounting LocationBench Operation Output Connections Connect the Power CordWire Considerations Input ConnectionsMultiple Load Connections Remote Sense ConnectionsVoltage Drops Remote Sense Connections Sense LeadsStability OVP ConsiderationsPage Digital I/O Connections FLT/INH DIGital I/O ConnectorFLT/INH Examples Pin Input/Output Description Controller ConnectionsHP-IB Interface RS-232 InterfaceIntroduction Using the KeypadTurn-On Checkout Model Voltage OV Prot Current Checkout ProcedureProcedure Display Explanation Checkout Programming ValuesPress 5, Enter Procedure Display ExplanationLine Fuse Error MessagesCase of Trouble Front Panel Description Front panel OperationEntry Keys Display AnnunciatorsRotary Control Line System Keys Function KeysSystem Keys Display Command FunctionScrolling Keys Function KeysImmediate Action Keys LOW Metering KeysDisplay Measurement HighVoltprot value Output Control KeysRST OC OT OV RI FSEntry Keys Entry KeysSet the output voltage Setting the Output Voltage and CurrentEnable the output Examples of Front Panel ProgrammingAction Querying and Clearing Output ProtectionMaking Front Panel Measurements Currdet Acdc Use the Meter menu for making front panel measurementsCurrrang Auto Programming the Digital Output Port To configure the Ridfi mode of the port, proceed as followsTo configure the Digio mode of the port, proceed as follows Set the HP-IB address as follows Setting the HP-IB Address and RS-232 ParametersConfigure the RS-232 interface as follows Programming the Output Relay option 760 onlyRecall a saved state as follows Select the power-on state of the dc source as followsSaving and Recalling Operating States Save an operating state in location 1 as followsPage Specifications Table A-2. Supplemental Characteristics Supplemental CharacteristicsDynamic Measurement Command ProcessingINH/FLT Characteristics Parameter HP 66332AShipping weight Digital I/O CharacteristicsDimensions Net weightTable B-1. Equipment Required Test SetupVerification and Calibration Equipment RequiredPerforming the Verification Tests Figure B-1. Verification & Calibration Test SetupTable B-2. Verification Programming Values Turn-On CheckoutVoltage Programming and Measurement Accuracy Current Programming and Measurement AccuracyCurrrang LOW Current Measurement Low RangeCurrent Sink Measurement Current Sink Measurement Table B- 3. Verification Test Record for HP 6631BCurrent Programming and Measurement High Range Current Measurement Low RangeTable B- 6. Verification Test Record for HP 6634B Table B- 5. Verification Test Record for HP 6633BFront Panel Calibration Menu Performing the Calibration ProcedureOvervoltage Protection Calibration Enable Calibration ModeFront Panel Calibration Voltage Programming and Measurement CalibrationLow-Range Current Measurement Calibration Current Programming and High-Range Measurement CalibrationNegative Current Programming Calibration AC Current Measurement Calibration HP 66332A only Calibration Error MessagesTable B- 7. HP-IB Calibration Error Messages Error MeaningCalpass Changing the Calibration PasswordCalibration Over the HP-IB Page Table C-1. Error Numbers Error MessagesError Number List Error Messages Error Messages C Page Open the Unit Configure the Power TransformerLine Voltage Conversion Close the Unit Install the Correct Line FuseIndex Index Index Latin America United States of America EuropeJapan Asia PacificManual Updates
Related manuals
Manual 94 pages 1.46 Kb

6631B, 6633B, 6634B, 6632B specifications

The HP 6632B, 6634B, 6612B, and 6633B are high-performance programmable power supplies that have gained prominence in various testing and measurement applications. These models are part of the HP 6000 series, which is renowned for its reliability and versatility in providing precision power supply solutions.

The HP 6632B offers a dual-output capability, delivering up to 32 volts and 3 amps per channel. It is designed for applications requiring stable and accurate voltage and current supplies. With features like overvoltage protection and short-circuit protection, it ensures the safety of both the device under test and the power supply itself. The programmable voltage and current settings allow operators to automate their testing procedures, increasing efficiency.

The HP 6634B takes performance a step further with multiple outputs, providing up to 32 volts and 5 amps per channel. This model is particularly suited for applications requiring higher current, especially in battery testing and device characterization. The ability to program the device remotely adds an extra layer of usability, making it ideal for integration into automated testing environments.

The HP 6612B model is tailored for users who require a compact and portable power supply solution. It delivers up to 20 volts and 2 amps. Despite its smaller size, it retains essential features like programmable settings and fast transient response, making it suitable for both educational purposes and field testing scenarios.

For users looking for a versatile, multi-channel solution, the HP 6633B presents itself as an excellent choice. This model offers up to 32 volts and 5 amps across multiple outputs. It supports a wide range of programmable features and has an intuitive interface, making it user-friendly for both beginners and experienced engineers. The robust design of the 6633B ensures reliable performance in demanding environments.

All four models utilize advanced linear power supply technology that minimizes ripple and noise, which is critical for sensitive electronic components. Together, these power supplies provide professionals in research, manufacturing, and testing with the precision they need for their experiments and product developments. The combination of programmability, safety features, and high-performance specifications makes the HP 6632B, 6634B, 6612B, and 6633B essential tools for electronic engineers and technicians.
Top Page Image Contents