HP 355856-001 manual Removing the Access Panels

Page 7

Hardware Upgrades

4.Slide the access panel back about 1 inch (2.5 cm), then lift it away from and off the unit.

Removing the Access Panels

To replace the access panel, reverse the removal steps.

The two access panels are physically identical. One access panel has captive thumbscrews that may be removed by unscrewing them.

Hardware Reference Guide

1–3

Image 7
Contents Hardware Reference Guide Hardware Reference Guide Contents Electrostatic Discharge Serviceability Features Hardware UpgradesPage Removing the Access Panels Removing the Front Bezel Drive Bezel Blank Removing Front Drive BezelsDiskette Drive Bezel DIMMs Installing Additional MemoryDDR-SDRAM DIMMs Single Channel and Dual Channel Modes Installing Memory Modules Installing a Memory Module Installing an Expansion Card Installing an Expansion Card Replacing or Upgrading a Drive Drive Positions Drive PositionsRemoving a 5.25 Drive Removing a Diskette Drive Removing the Lower Drive Cage Removing the Lower Drive Cage Removing a 3.5 Hard Drive Hardware Upgrades Replacing the Battery Battery ReplacementBattery Replacement Type Inserting a Type 1 Battery Removing a Type 2 Battery Battery Replacement Routine Care Routine Care & Shipping InformationOperation Optical Disk Drive PrecautionsCleaning SafetyShipping Preparation Routine Care & Shipping Information Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Index Index-2