HP 355856-001 manual Type

Page 27

Battery Replacement

Type 1:

a.To release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery.

b.When the battery pops up, lift it out.

Removing a Type 1 Battery

Hardware Reference Guide

2–3

Image 27

Contents Hardware Reference Guide Hardware Reference Guide Contents Electrostatic Discharge Serviceability Features Hardware UpgradesPage Removing the Access Panels Removing the Front Bezel Drive Bezel Blank Removing Front Drive BezelsDiskette Drive Bezel Installing Additional Memory DIMMsDDR-SDRAM DIMMs Single Channel and Dual Channel Modes Installing Memory Modules Installing a Memory Module Installing an Expansion Card Installing an Expansion Card Replacing or Upgrading a Drive Drive Positions Drive PositionsRemoving a 5.25 Drive Removing a Diskette Drive Removing the Lower Drive Cage Removing the Lower Drive Cage Removing a 3.5 Hard Drive Hardware Upgrades Replacing the Battery Battery ReplacementBattery Replacement Type Inserting a Type 1 Battery Removing a Type 2 Battery Battery Replacement Routine Care Routine Care & Shipping InformationOperation Optical Disk Drive PrecautionsCleaning SafetyShipping Preparation Routine Care & Shipping Information Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Index Index-2