HP HB4 manual Using a microphone

4Click the option for the number of speakers to match your multi-channel speaker system, and then click Apply.

NOTE: To test the speakers (multi-channel speakers only), click the Test button. The WinDVD control panel shows the speaker number being used. Click Stop.

5Click OK.

NOTE: If you want to play a stereo DVD, change the audio properties of WinDVD to match the recorded DVD audio output.

using a microphone

Your PC comes with one microphone connector in the back of the PC. Some models have a second microphone connector in the front of the PC. Only one microphone connector works at a time, and the back connector is ready to use unless you have the multi-channel audio speakers option. For PCs with the multi- channel audio speakers option, the microphone connector in the front of the PC, if present, is ready to use. See “using the microphone with multi-channel audio“ on page 45.

To use a microphone connected to the front of your PC (select models only), select the working microphone.

NOTE: If you connect your microphone to the back of your PC, you do not need to perform this procedure.

1Double-click the Volume icon on the taskbar. The Volume Control settings window opens.

NOTE: If you do not see this Volume icon, click Start, click Control Panel, click Sounds, Speech, and Audio Devices, if it is present, and then double-click Sounds and Audio Devices to open the Sounds and Audio Devices Properties window. On the Volume tab, place a check in the Place volume icon in the taskbar check box. Click Apply, and then click OK. The Volume icon appears in the taskbar.

2Select Options and click Properties.

3In Adjust volume for, click Recording.

4In Show the following volume controls, place a check in the Microphone check box.

5Click OK.

44user’s guide