HP HB4 manual Storing cds, dvds, or memory, Docking a peripheral device

storing cds, dvds, or memory

To store CDs and DVDs, open the bay cover (figure A) and gently lift the two sections to form the spindle (figure B). You can store up to ten discs.

To store memory cards, open the top cover and, if necessary, lower the two spindle sections (figure A).

A

B

docking a peripheral device

To use the multi-storage bay for a peripheral device, do the following:

1Open the bay cover (A). Hold the cover on each side near the hinges, and then lift the cover and slide it toward the back of the chassis (C). Gently lift it off.

2Thread the cables through the cable tunnel opening at the back of the bay (D). Connect data and power cables to the peripheral device, and place the peripheral in the bay.

64user’s guide