print from a memory card
Once the proof sheet has printed, you can mark the proof sheet to indicate the photos you want to print, the size of the photos, and the number of photo copies you want to print. You can then scan the proof sheet into the printer, and the printer will print the selected photos to your specifications. For more information about how to select photos on a proof sheet then scan it into the printer, see the next section.
scan a proof sheet
After you print a proof sheet, you can use it to print specific photos from your memory card.
1Select the photos you want to print by filling in the circle below each photo with a dark pen.
2Select only one choice each in the number of copies section and the layout section.
Note: If you make more than one selection in either of these sections, an error appears on the LCD screen, and you will need to print a new proof sheet and start over.
3Make sure that the memory card is inserted in the memory card slot on the printer’s control panel.
4On the printer’s control panel, press the MENU button.
5Press the SELECT PHOTOS button until Print special appears highlighted on the printer’s LCD screen, and then press the OK button.
6Press the SELECT PHOTOS button until Scan proof sheet appears highlighted on the printer’s LCD screen, and then press the OK button.
A message appears on the LCD screen instructing you how to insert the proof sheet.
7Load the proof sheet in the In tray with the printed side facing down and the top of the page facing toward the printer.
8Press the OK button to start the scanning process.
After the proof sheet is scanned, a message appears on the LCD screen prompting you to load the correct paper for the print job.
9Load the correct paper for printing your photos in the In tray, and then press the OK button to print the photos that you selected.
Note: The printer can only scan one proof sheet at a time. Repeat steps 1– 9for each proof sheet you want to scan.
basics guide | 29 |