Maintenance & Service Guide
Presario 1660 Model
MSG Index Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Service Considerations
Listed below are some of the considerations that you should keep in mind during the disassembly and reassembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
●Compaq screwdriver kit (Spare Part No.
●Torx
●
●Small, standard screwdriver
●Small, Phillips screwdriver
●Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations.
As each subassembly is removed from the computer, IMPORTANT: it should be placed away from the work area to
prevent damage.
Return to Removal & Replacement Procedures