Maintenance & Service Guide
Presario 1660 Model
MSG Index Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Removing the Palmrest Assembly (continued)
6. Disconnect the flex cable from the LIF connector on the palmrest cover.
End of procedure.
CAUTION: When replacing the Palmrest Assembly, ensure that the cable is fully inserted into the LIF connector on the system board. If the metal end should come in contact with the keyboard, damage may occur to the computer.
To replace the Palmrest Assembly, reverse the previous steps.
When replacing the palm rest
NOTE: cover, ensure the cable is properly routed through the
slot on the Upper CPU cover.
Return to Removal & Replacement
Procedures