Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice Preface Home Product Description Troubleshooting Illustrated Parts Catalog
Removal & Replacement Procedures Specifications Connector Pin Assignments Battery Pack
Removing The Speaker Assembly
Removing
the Battery Pack
Palmrest Cover with Touch Pad
Keyboard Heatspreader Status Panel
Interface Board
Hard Drive
Battery
Charger
Board CD Drive
Display
Assembly
Plastic Subpanel Assembly
CD Drive Cable
Speaker
Assembly
Modem
Diskette
Drive
Fan
Audio
Assembly
Board
System
Board
Memory
Module
Removing the Screws from the CD Guide Support Bracket
1.Prepare the computer for disassembly.
2.Remove the palmrest cover with touch pad.
3.Remove the keyboard.
4.Remove the heatspreader
5.Remove the hard drives
6.Remove the stiffener bracket
7.Remove the CD drive and hard drive cable shield
8.Remove the four screws from the CD Guide support bracket and remove the CD Guide support bracket and
PCMCIA shield as shown.
Next
NOTE: When replacing the CD Guide support bracket, ensure the PCMCIA shield is properly replaced.