HP 1215EA manual Insert and Remove Discs, Inserting a Disc

Insert and Remove Discs

This section covers:

•Inserting a Disc

•Removing a Disc

•Manually Ejecting a Disc

If your Notebook power is off, you will not be able to eject a disc from the CD or DVD drive. To remove a disc without powering up your Notebook, you must manually eject the disc from the drive.

Inserting a Disc

To load a disc into the disc drive, complete the following steps:

Caution: Improper handling of a CD or DVD can damage the disc and could potentially damage the drive.

1.Press the Eject ≤ button located on the front of the drive.

2.Remove a disc from its protective case, holding the disc by its centre hole and outer edge to avoid touching the surface.

3.Place the disc, label side up (unless it is a double-sided DVD), into the round area of the tray. Gently press the disc down onto the centre spindle of the tray until the disc snaps into place.

Caution: Before closing the disc tray, ensure that the disc snaps onto the spindle in the centre of the tray. You can damage the disc and your Notebook if the disc is not seated properly.

4.Push the tray back into the drive until the drive locks into place.

5-2 USING THE CD OR DVD DRIVE	PRESARIO NOTEBOOK BEYOND SET-UP GUIDE
	1200 SERIES