Thermo Products PHCFA072DV4R Limit Position and Location, Burner Installation, Fig-7

Page 17

F. LIMIT POSITION AND LOCATION:

WARNING: The predetermined limit locations on all of the Thermo Pride oil fired furnaces have been tested and approved by Thermo Products, LLC. Any attempt to relocate these safety controls or replace these safety controls with a control that is not approved, or is incompatible, may result in personal injury, substantial property damage or death.

G. BURNER INSTALLATION:

NOTICE: This furnace comes with a Riello BF3 burner preinstalled from the factory. If there is a need to remove the burner prior to installation or during service, the following explains how the burner is inserted and mounted.

The oil burner is mounted on three stud mounting bolts on the mounting plate covering the opening in the front of the heat exchanger. This unit is designed with a pre-positioned chamber. There is no insertion adjustment necessary. The unit requires only the mounting of the burner. Insertion is pre-determined. The top panel is removable by taking out the four screws for easy access to the burner and the piping. Replace this panel prior to operating the furnace.

Fig-7

H. BURNER SPECIFICATIONS AND APPLICATIONS:

The BF3 Riello flame retention oil burner is the only oil burner that can be used on the OHC.

 

THERMO

 

RIELLO

MAXIMUM

SHIPPED

OIL

 

PRIDE’S

AMULETTE

BURNER

NOZZLE

NOZZLE SIZE

PUMP

FURNACE MODEL

BURNER

 

MODEL &

SIZE**

 

PRESSURE

 

SPEC NO.

 

TUBE

 

 

(PSIG)

 

 

 

LENGTH

 

 

 

OHCFA072DV4R

C8511373

380789

BF3-4.5”

0.50X60° H

0.50X60° H

145

 

 

 

 

 

 

 

Table 3: Riello burner specifications

14

Page 16 Page 18
Image 17
Page 16 Page 18
Contents OHCFA072DV4R OIL Fired FurnaceContents = Front = Highboy D = DownflowCAUTION do not Attempt to Start the Burner When Safety SectionWARNING and Cautions Page Codes and Clearances Non-combustible material Combustible materialHighboy OHCFA072DV4RII. General Instructions Venting Fig-1 Fig-2 Installation of VentorFig-3 Page Fig-4 Condensate Drain Line ConnectionsDuct WORK/AIR Conditioning Air Filter Mounted External to Furnace Ft/min Maximum Model Number Filter Type Air VelocityOHC Burner Specifications and Applications Burner InstallationLimit Position and Location Fig-7Riello OIL Tank and PipingBTU/HR OHCFA072DV4R 75,000 72,000Page Room Thermostat Electrical WiringElectrical Connections Electronic Air Cleaner EAC and Humidifier Installation Post-Purge TimerBlower Motor Speed Selection Thermostat Anticipator SettingAlterations REQ’D for A/C @ Design External Static Pressure OHCFA072DV4Inputs Terminal Definitions & Field WiringBlower Controller Information for ECM Motor Outputs Operating Modes On and OFF Blower Delay Time Switch Settings Diagnostic Features Trouble ShootingStartup Procedures Sequence of Operation for the OHC To Turn Off Oil to AppliancePage Page Setting Supply Air Temperature Rise Adjustment Of Heat Input RateCheckout Procedure III. Users Information Section Filter Cleaning and LocationInspection Areas  Caution do not Attempt to Make Repairs YourselfIV. Installers Instructions to User General Inspection Dealer Maintenance Safety During Servicing and InspectionHeat Exchanger Cleaning Instructions Page Fig-12 Fig-13 Electrical System Filter maintenance procedureSUPPLY/RETURN AIR Blower SUPPLY/RETURN AIR FilterOn Shutdown Filter replacementExtended Appliance Shutdown On Startup VI. HOMEOWNER/USER Information and Routine Maintenance Fig-16 Page Page Page Page Page Page Customer Appendix a Replacement Parts OHC BF3 Riello Burner Page Appendix B Wiring Diagram

PHCFA072DV4R specifications

The Thermo Products PHCFA072DV4R is a cutting-edge heating and cooling solution designed for modern residential and light commercial applications. This unit stands out due to its efficient performance and advanced technology. One of the most remarkable features of the PHCFA072DV4R is its energy efficiency. It boasts a high SEER rating that ensures reduced energy consumption without sacrificing comfort, making it an environmentally friendly choice for homeowners.

This system utilizes an inverter-driven compressor, which allows for variable speed operation. This means that the unit can adjust its output to match the specific heating or cooling needs of a space, providing more consistent temperatures and enhanced comfort. Additionally, this inverter technology minimizes noise levels, making the PHCFA072DV4R a quieter option compared to traditional fixed-speed systems.

Another noteworthy characteristic of the PHCFA072DV4R is its advanced filtration system. It is equipped with high-efficiency filters that effectively capture dust, pollen, and other airborne particles, ensuring improved indoor air quality. For those who suffer from allergies or have respiratory issues, this feature can provide significant relief.

The unit offers a user-friendly interface with a smart thermostat that enables users to control the system remotely. Through a mobile app, homeowners can adjust settings, set schedules, and monitor energy usage from anywhere, which adds a layer of convenience to the overall user experience.

Additionally, the PHCFA072DV4R is built with durability in mind. Its robust construction and high-quality materials ensure long-term reliability, reducing the likelihood of costly repairs. It also comes with a warranty that reflects the manufacturer's confidence in the product's performance.

Overall, the Thermo Products PHCFA072DV4R encapsulates efficiency, comfort, and advanced technology in a single package. Its ability to adapt to varying conditions, combined with features focused on air quality and ease of use, make it a prime choice for anyone looking for a versatile heating and cooling solution. This unit not only meets the demands of today's consumers but also aligns with sustainable practices, making it an ideal addition to any home or business.
Top Page Image Contents