HP m300 manual Activity Lights, MultiBays, MultiBay/Device Compatibility

Page 12

Activity Lights

The ArmadaStation EM has three activity lights.

Top and Bottom MultiBay Activity Lights

The top and bottom MultiBay activity lights are located on the front/right corner of the ArmadaStation EM. These lights turn on when information from a removable drive inserted in the ArmadaStation EM MultiBays is accessed.

Power/Suspend Light

The power/suspend light is located on the front/right corner of the ArmadaStation EM. This light turns on when the system (computer and ArmadaStation EM) is turned on; this light blinks when the system is placed in Suspend.

MultiBays

The ArmadaStation EM features two MultiBays. The MultiBays support the same drives that are used in the E and M Series computer MultiBay, including hard drives (installed into a MultiBay hard drive adapter), CD-ROM drives, DVD-ROM drives, diskette drives (bottom MultiBay only), and SuperDisk LS-120 drives. The bottom MultiBay can also be used to charge MultiBay battery packs.

The ArmadaStation EM MultiBays support the following devices:

Table 1-5

MultiBay/Device Compatibility

Device

 

Top MultiBay

 

Bottom MultiBay

Hard Drive

 

 

 

 

 

 

 

Diskette Drive

 

 

 

 

 

 

 

 

CD-ROM drive

 

 

 

 

 

 

 

DVD-ROM drive

 

 

 

 

 

 

 

Battery pack

 

 

 

 

 

 

 

 

SuperDisk LS-120 drive

 

 

 

 

 

 

 

The system (computer and ArmadaStation EM) must be turned off when inserting or removing a hard drive, diskette drive, or CD-ROM drive from the MultiBay. The system does not have to be turned off when inserting or removing a battery pack.

1-6Product Description

Image 12
Contents Compaq ArmadaStation EM Maintenance and Service Guide Contents Appendix Using this Guide SymbolsTechnician Notes Serial Number Locating Additional InformationArmadaStation EM Features Product DescriptionSecurity Features External ConnectorsArmadaStation EM Components ArmadaStation EM Front ComponentsDescription Function Volume control switch ArmadaStation EM Right Side ComponentsArmadaStation EM Rear Panel Components ArmadaStation EM Rear Panel ComponentsActivity Lights MultiBaysMultiBay/Device Compatibility DeviceHalf-Height Bay Security LockPCI Expansion Boards Troubleshooting Before Replacing PartsProblems and Solutions Solving Docking and Undocking ProblemsSolving Expansion Board Problems Problem Probable Cause Recommended ActionsSolving External Keyboard Problems Solving External Mouse ProblemsSolving Expansion Device Installation Problems Solving External Monitor Problems Press any key or click the mouseIllustrated Parts Catalog Serial Number LocationCompaq ArmadaStation EM Components Compaq ArmadaStation EM ComponentsSpare Parts Compaq ArmadaStation EM Components DescriptionPlastics Kit Components Plastics Kit Components Spare Part NumberItem Description MultiBay Option Cable Kit MultiBay Option Cable Kit Components Spare Part NumberMiscellaneous Spare Parts Miscellaneous not illustratedSpare Part Number Removal and Replacement Preliminaries Electrostatic DischargeGenerating Static Preventing Electrostatic Damage to EquipmentTypical Electrostatic Voltages Relative Humidity Event 10% 40% 55%Preventing Damage to Drives Grounding MethodsStatic Shielding Protection Levels MethodGrounding Workstations Grounding EquipmentRecommended Materials and Equipment Service Considerations Tool and Software RequirementsScrews Cables and Connectors Plastic PartsRemoval and Replacement Procedures Disassembly Sequence Chart Expansion Base Disassembly SequencePreparing the Expansion Base for Disassembly Disconnecting the Expansion BaseExternal Components Expansion Base FeetTray Removing the TrayConnector Cover Removing the Connector CoverRear Bezel Removing the Rear BezelSliding the Manual Release Lever PCI Expansion Boards Locating the Expansion Slots10.Removing the Expansion Slot Cover 11.Installing an Expansion Board Top Cover 12.Removing the Top Cover ScrewsSwing the top cover up and forward to remove it Figure Installing a Half-Height Drive Half-Height Bay15.Removing the Half-Height Bay Blank Bezel Cover 16.Removing the Half-Height Drive Screws 17.Attaching the Bezel Cage to the Half-Height Drive 18.Connecting the Power Cable 19.Connecting the Diskette Drive Cable 20.Connecting the Hard Drive Cable 21.Connecting the CD-ROM Drive/Audio Cable 22.Installing a Half-Height Drive Left Speaker 23.Removing the Left Speaker24.Disconnecting the Half-Height Bay and Left Speaker Cables MultiBay25.Removing the MultiBay and Control Panel Control Panel 26.Removing the Control PanelMechanism Assembly 28.Removing the Mechanism Assembly Power Supply 30.Removing the Power Supply Backplane 31.Removing the BackplaneExpansion Base Physical and Environmental Specifications PecificationsMetric 2Specifications Connector PIN Assignments Table A-1 Headphone JackTable A-2 Microphone Jack Table A-5 Serial Connector Table A-3Table A-4 Table A-6 Table A-7 Stereo Line-out JackTable A-8 Stereo Line-in Jack Table A-13 Docking Connector Signal PinPDATA6 LD14 Pin Signal Power Cord SET Requirements Conductor Power Cord SetGeneral Requirements Conductor Power Cord Set Requirements-By Country Country-Specific RequirementsCountry Accredited Agency Applicable Note Numbers Index PCI Index
Related manuals
Manual 13 pages 51.21 Kb