HP m300 manual Attaching the Bezel Cage to the Half-Height Drive

10.Align the front cover of the half-height drive with the tab on the front of the bezel cage ➊ (Figure 5-17).

NOTE: The bezel cage should be aligned so the “L” and “LEFT” indicators can be read when the half-height drive is installed in the expansion base left half-height bay.

11.Install the four screws ➋ that secure the half-height drive to the bezel cage.

Figure 5-17.Attaching the Bezel Cage to the Half-Height Drive

Removal and Replacement Procedures 5-17