HP m300 manual Preparing the Expansion Base for Disassembly, Disconnecting the Expansion Base

5.3Preparing the Expansion Base for Disassembly

1.Turn the expansion base keylock counterclockwise to unlock it.

2.Undock the computer from the expansion base.

3.Turn off the expansion base.

4.Disconnect the power cord from the wall outlet ➊ (Figure 5-3).

5.Disconnect the power cord from the expansion base ➋.

Figure 5-3.Disconnecting the Expansion Base

6.Disconnect any external devices.

7.If installed, remove any MultiBay devices from the expansion base MultiBays.

Removal and Replacement Procedures 5-3