HP T1453-90001 manual Action Pulldown for Creating Virtual LANs

Configuring VLANs Using SAM

Configuring VLANs Using SAM

6.On the Virtual LAN screen, available VLAN-aware cards are displayed. When you select a LAN card and then use the Create VLAN pulldown (Figure 3-2), the Create VLAN screen appears (Figure 3-3). For the VLAN ID, enter any number between 0 and 4094 and use it only once within that port.

NOTE	The VLAN ID is not the same as the number of VLANs supported
	--HP-UX supports up to 1024 VLANS per LAN card port.

Figure 3-2 Action Pulldown for Creating Virtual LANs

On this screen, you can optionally add a VLAN Name (31 chars, and unique within a LAN card), priority, ToS, and overrides. See the chapter “Overview of Installation and Configuration:” or the online help for details.

Chapter 3 39