HP T1453-90001 manual Conftos

			Configuring VLANs by Editing vlanconf File
			Modifying Parameters in vlanconf File
#		priority. Only for
#		IP	packets. For non-IP
#		packets, CONF_PRI
#		will be used.
#	CONF_TOS	- User specified ToS, taken
#		from VLAN_TOS[] will be
#		converted to
#		802.1p priority.
#
# VLAN_TOS_OVERRIDE	: Inbound ToS value to be used for IP
#	packets.
#	Allowed ToS override levels are as follows:
#
#	IP_HEADER	-	ToS value in the IP
#			header will be used
#			(default if not
#			specified).
#	ETHER_HEADER -		Ether header 802.1p
#			priority will be
#			converted to ToS
#			value.
#	CONF_TOS	-	ToS specified by the user
#			will be used.
#	CONF_PRI	-	802.1p priority given in
#			VLAN_PRIORITY[] will
#			be converted to ToS
#			value.
#
# VLAN_NAME	: Name of the VLAN. Its a simple string,
#	which consists		of alphanumeric
#	characters. No		special characters
#	allowed.
#
# VLAN_VPPA	: User requested		VPPA for the VLAN Virtual
#	Interface that		will be created by the
#	information given above. If not
#	specified system will assign a VPPA.
#
#

#For each VLAN configuration, add a set of variable # assignments like the ones below, changing the index to “[1]”, # “[2]” et cetera.

##############################################################

#

#Sample Entry

#VLAN_PHY_INTERFACE[1]=

Chapter 4 45