HP E5123A manual Input and Output Speciﬁcations

Page 16

Standards and Specifications

Input and Output Speciﬁcations

Transmit Levels

Parameter	Nominal	Min.	Max.	Notes

Signal level	1.0 V (pp)	0.9 V (pp)	1.1 V (pp)	complies with ITU-T G.703
Line rate	155.52 Mb/s	–4.6 ppm	+4.6 ppm	using internal frequency reference
Line jitter				complies with ITU-T G.825 (SDH),
				Bellcore GR-253-CORE, and
				Bellcore TR-TSY-000499 (SONET)

Receive Levels

Parameter	Nominal	Min.	Max.	Notes

Sensitivity		13 dB		complies with ITU-T G.703
Line rate	155.52 Mb/s	–15 ppm	+15 ppm
Jitter tolerance				complies with ITU-T G.825 (SDH),
				Bellcore GR-253-CORE, and
				Bellcore TR-TSY-000499 (SONET)
Jitter transfer				complies with ITU-T G.825 (SDH),
				Bellcore GR-253-CORE, and
				Bellcore TR-TSY-000499 (SONET)

12

Image 16

Contents Setting Up STM-1 Electrical Interface Pod Broadband Service AnalyzerWarranty CopyrightPrinting history Product supportContents What is it? What does it do? About the STM-1 Electrical Interface Pod Online Help To Access User Online HelpOnline Help Front Panel at a Glance Access Signal OutFront Panel at a Glance To Set Up the Interface Pod To Set Up the Interface PodTo Insert the Interface Pod To Remove the Interface Pod To Connect to the System Under TestReceive Rx Automatic Conﬁguration Parameters See alsoTo Manually Conﬁgure the Interface Pod Click the STM-1 tabWhat to Do Next What to Do NextStandards and Speciﬁcations Standards and SpecificationsCommunications Standards Input and Output Speciﬁcations Physical Speciﬁcations Error Generation SpeciﬁcationsEnvironmental Speciﬁcations Limitation of Warranty CertificationExclusive Remedies Restricted Rights LegendSafety Symbols Do not clean with fluidsKeep away from live Service et ajustement Service non autoriséSymboles des sécurité AvertissementDeclaration of Conformity Page