HP E5123A Physical Speciﬁcations, Environmental Speciﬁcations, Error Generation Speciﬁcations

Page 17

Standards and Specifications

Physical Speciﬁcations

Weight	1.0 kg ( 2.2 lbs) (nominal)
Dimensions	Height:	44 mm (1.73 inches)
	Width:	149 mm (5.87 inches)
	Length:	222 mm (8.74 inches) not including front panel connectors
		236 mm (9.29 inches) including front panel connectors

Environmental Speciﬁcations

Parameter	Nominal Min.	Max.	Notes

Operating Temperature	5 oC	45 oC	with two interface pods installed
	(41 oF)	(113 oF)
Storage Temperature	–40 oC	70 oC
	(–40 oF)	(158 oF)
Humidity	15%	90%	at 40 oC (104 oF)
Altitude		4.6 km
		(2.86 miles)

Error Generation Speciﬁcations

Parameter	Nominal Min.	Max.	Notes

Line error ratios	1 x 10 -9	1 x 10 -3	errors are added bit synchronously
			and are accurate to 0.1% or better
FEBE ratio	1 x 10 -9	1 x 10 -3	errors are added bit synchronously
			and are accurate to 0.1% or better

13

Image 17

Contents Broadband Service Analyzer Setting Up STM-1 Electrical Interface PodCopyright WarrantyPrinting history Product supportContents What is it? What does it do? About the STM-1 Electrical Interface Pod Online Help To Access User Online HelpOnline Help Front Panel at a Glance Access Signal OutFront Panel at a Glance To Set Up the Interface Pod To Set Up the Interface PodTo Insert the Interface Pod To Connect to the System Under Test To Remove the Interface PodReceive Rx See also Automatic Conﬁguration ParametersClick the STM-1 tab To Manually Conﬁgure the Interface PodWhat to Do Next What to Do NextCommunications Standards Standards and SpecificationsStandards and Speciﬁcations Input and Output Speciﬁcations Environmental Speciﬁcations Error Generation SpeciﬁcationsPhysical Speciﬁcations Certification Limitation of WarrantyExclusive Remedies Restricted Rights LegendKeep away from live Do not clean with fluidsSafety Symbols Service non autorisé Service et ajustementSymboles des sécurité AvertissementDeclaration of Conformity Page