Copyright, Warranty, Printing history, Product support

Copyright	© Hewlett Packard Australia Ltd 1996
		All rights reserved.
Notice		The information contained in this document is subject to change without notice.
		HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL,
		INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
		FOR A PARTICULAR PURPOSE.
		Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages
		in connection with the furnishing, performance, or use of this material.
Warranty		A copy of the specific warranty terms applicable to your product and replacement parts can be obtained
		from your local Sales and Service Office.
Printing history		New editions of this guide are issued to reflect extensive changes made to the application. Revisions may
		be issued between application versions to correct errors in the manual. There may not be a new edition
		issued in conjunction with every application version release. The application version at the date of
		printing is noted in the following table.
		Manual Name:	Setting Up the STM-1 Electrical Interface Pod
		Manual Part Number:	E5123-90001
		Product Model Number: HP E5123A
		Edition	Printing Date	Application Version
		1	May 1996	A.01.20
		1a	February 1997	A.01.60

Product support	Hewlett Packard Australia Ltd
	Australian Telecom Operation
	PO Box 221
	Blackburn, 3130
	Victoria, Australia

We want to hear from you. If you have any comments, questions, or suggestions about our documentation or support, send them to:

Email: ato_support@aus.hp.com

Fax: +61 3 9210 5570

Phone: +61 3 9272 8633

Printed in Australia

Copyright