HP 28642A manual Removal/Replacement of the Card, For card removal, follow the procedures below

Removal/Replacement of the Card

For card removal, follow the procedures below:

1.Before removing the card, ensure that the operating systemis shut down and that power to the host computer is off. Consult your computer systemmanualsfor proper shutdown procedures to avoid corruption or lossof data.

2.Accessthe f/O cardcageaccording to instructions in your systemmanuals.

3.Disconnect the cablesfrom the card.

4.Unscrew the two retaining screwsthat secure the card to the cardcage.

5.Simultaneously lift both extractor levers on the card. This will disconnect the card from the HP-PB backplane connectors.

6.Slide the card out of its slot.

To install a replacement card, follow the procedures described in chapter 1.

2-10 Service Information