Loading accessory
Introduction
The loading accessory helps you to load some substrate types that are difficult to load without it. See The loading accessory on page 50.
The front panel
Your printer's front panel is located at the front right of the printer. It has the following important functions:
●Assists you in troubleshooting issues
●Is used when performing certain physical operations, such as unloading substrate and maintaining the printer
●Displays information in brief about the status of the printer
●Displays warning and error messages, when appropriate, along with audio alerts to call attention to a warning or message
The front panel has the following components:
1.Power key: To turn the printer off. See Turn the printer on and off on page 11.
2.Power light: Indicates the printer's power status. If the light is off, the printer is off. If it is solid green, the printer is on. If it is flashing green, the printer is in transition between on and off.
3.
4.Status light: Indicates the printer's operational status. If the light is off, the printer is not ready. If it
is solid green, the printer is ready and idle. If it is flashing green, the printer is busy: receiving data, processing or printing. If it is flashing amber, your intervention is required. If it is solid amber, a serious error has occurred.
ENWW | The printer’s main components | 9 |