Introduction
Warning labels
Label | Explanation |
|
|
| Risk of burns. Do not touch the internal enclosures of drying |
| and curing modules of the printer. |
Risk of burns. Do not touch the drying enclosure of the printer. Even after opening the window latch, which disconnects the power to the drying and curing modules, the internal surfaces could be hot.
Electric shock hazard. The printer has two input power cords. A voltage is still present in the drying and curing modules after the main switch is turned off. There are no operator- serviceable parts inside the printer. Refer servicing to qualified service personnel. Disconnect all power cords before servicing.
See installation instructions before connecting to the supply. Ensure that the input voltage is within the printer's rated voltage range. The printer requires two dedicated lines, each protected by a branch circuit breaker according to the rating of the wall socket outlet. Use only earthed mains outlets and the power cords supplied by HP with the printer.
Risk of trapped hands. Do not push the roll while loading. Lift the loading table to ease the spindle into the printer.
Risk of trapped fingers. Do not touch spindle gears while moving.
Do not put objects on top of the printer. Do not cover the top fans.
You are recommended to wear gloves when handling ink cartridges, printhead cleaning cartridges and the printhead cleaning container.
4 | Chapter 1 Introduction | ENWW |