SPX Cooling Technologies FSIG-TS-08A specifications Construction

Page 14

Marley / Sigma F Series CoolingTower / Specifications: Base

14

 

 

Specifications

 

Specification Value

3.0Construction:

3.1

The tower shall be capable of with-

■ The limiting water quality values indicated are those which are

 

standing water having a pH of 6.5 to

acceptable for the normal materials of construction specified. If

 

8.0; a chloride content (NaCl) up to 750

water of more aggressive quality is anticipated please change

 

ppm; a sulfate content (SO4 ) up to

hardware material requirement to series 316 stainless steel, or

 

1200 ppm; a calcium content (CaCO3)

silicon bronze, as you may have agreed upon beforehand with

 

up to 800 ppm; silica (SiO2) up to 150

the Marley sales representative.

 

ppm; and design hot water tempera-

If there is any doubt in your mind as to the grade of hardware

 

tures up to 120°F (48.9°C). The circulat-

 

ing water will contain no oil, grease,

that is appropriate to your water quality, please have a sample of

 

fatty acids, or organic solvents.

it analyzed and provide Marley with a copy of the analysis.

3.2The structural framework of the tower shall be pultruded or molded fiberglass, designed in accordance with ASCE Structural Plastics Design Manual. All allowable design values shall be factored for wet service, temperature, and duration in accordance with standard engineering practices.

3.3

Basic design criteria shall be 30 psf

Discuss higher design loadings with your Marley sales represen-

 

(1.44 kPa) wind load and 5%g seismic

tative.

 

load.

 

3.4

Multicell towers shall include stainless

Multicell towers must have plenum partitions between cells.

 

steel partitions between cells in the fill

Otherwise, air will be induced downward through an inoperative

 

areas, and fiberglass partitions in the

fan, bypassing the fill entirely. Without these partitions, part-load

 

plenum area. Partitions shall extend

or off-season operation of the tower would be completely unsat-

 

the full height of the tower from the

isfactory.

 

base of fill to the underneath side of

Fill partitions prevent the random migration of water from cell to

 

the fan deck.

 

 

cell, and permit individual cell operation during reduced ambient

3.5

Column lines shall be on no greater

or low load conditions.

 

than 4'-0" (1.22 m) longitudinal centers,

 

 

and the base of all columns shall be

 

 

firmly anchored to series 304 stainless

 

 

steel base plates. Framing joints shall

 

 

be made with 1/2" diameter or larger

 

 

series 300 stainless steel machine

 

 

bolts. Critical framing joints shall be

 

 

augmented with 1.06" OD heavy wall

 

 

fiberglass sleeves to transmit loads.

 

3.6

No field gluing of joints, or any other

The variable weather conditions encountered during on-site

 

structural member, will be allowed.

construction of cooling towers does not result in the stable condi-

 

 

tions of temperature and humidity that assure proper bonding

 

 

during the gluing process.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Marley Sigma F Series Cooling Tower Marley / Sigma F Series CoolingTower / Table of Contents Marley / Sigma F Series CoolingTower Model 13-6Tower Sectionelevation 4 MAXPlan Tower Flow/Cell Dimensions Model Engineering Data Piping PlanSteel Basin End Elevation Steel Basin End ElevationSide Elevation Two-Speed Motors Variable Speed FanWater Treatment Sound Control Keeping It CleanEnclosures Marley / Sigma F Series CoolingTower / Specifications Base BaseThermal Performance Construction Fan Deck and Fan Cylinder Mechanical EquipmentFill, Louvers and Drift Eliminators Hot Water Distribution System CasingAccess and Safety Cold Water BasinScope of Work Cold Water Basin Options Stainless Steel Cold Water Basin Basin HeaterConvenience and Safety Options Fiberglass Stairway Wood StairwayLadder Extension Ladder Safety CagePlenum Walkway Hot Water Basin CoversCased Guardrail Air Inlet ScreensAppearance Options Architectural Casing Control Options Control System Mechanical Equipment section when Marley Premium VFD System Vibration Limit Switch Miscellaneous Options Galvanized Steel LadderFire-Retardant Fiberglass Fiberglass LadderLow Noise Tower Fan Cylinder ExtensionSpecifications Specification Value West 129 Street Overland PARK, Kansas 66213 United States

FSIG-TS-08A specifications

SPX Cooling Technologies has established itself as a leader in providing innovative cooling solutions, and the FSIG-TS-08A is a shining example of their engineering excellence. This advanced cooling system is designed for a variety of industrial and commercial applications where efficient heat exchange is crucial for optimal performance.

One of the standout features of the FSIG-TS-08A is its highly efficient heat transfer capabilities. The unit utilizes a corrosion-resistant heat exchanger design that enhances thermal performance while reducing maintenance needs. This is crucial in environments where durability and longevity are paramount. The robust construction of the FSIG-TS-08A ensures that it can withstand harsh operating conditions while maintaining its efficiency over time.

Another key characteristic of the FSIG-TS-08A is its energy-saving capabilities. In an era where energy costs are continually rising, this cooling solution incorporates advanced technologies that optimize energy consumption, leading to significant cost savings. The design includes variable speed fans that automatically adjust their operation based on cooling demand, which minimizes energy usage without sacrificing performance.

Moreover, the FSIG-TS-08A is equipped with a user-friendly control system, allowing operators to easily monitor and manage the unit's performance. The integrated controls provide real-time data on system operation and efficiency, further enhancing operational reliability.

The FSIG-TS-08A also boasts a compact design, making it suitable for installation in spaces where traditional cooling solutions may not fit. Its streamlined footprint does not compromise its cooling capability, making it an ideal choice for a wide range of settings, including manufacturing plants, power generation facilities, and other industrial operations.

In terms of versatility, the FSIG-TS-08A can be customized to meet specific requirements based on the application. This adaptability empowers businesses to leverage the cooling system to meet their unique challenges effectively.

In summary, SPX Cooling Technologies' FSIG-TS-08A is a cutting-edge cooling solution combining efficiency, durability, and flexibility. With its advanced technologies, energy-saving features, and user-friendly controls, the FSIG-TS-08A is well-equipped to meet the demanding needs of today's industrial landscape. It is a testament to SPX's commitment to delivering high-quality, innovative products that help organizations improve their operational efficiency while reducing their environmental footprint.
Top Page Image Contents