SPX Cooling Technologies FSIG-TS-08A specifications Hot Water Distribution System, Casing

Page 17

Marley / Sigma F Series CoolingTower / Specifications: Base

17

 

 

Specifications

 

Specification Value

7.0Hot Water Distribution System:

7.1

The mechanical equipment support/

■ Gravity-flow distribution basins are a feature of crossflow type

 

crossover pipe for each cell shall be

towers. These basins are out where they can be easily inspect-

 

equipped with a flange for the attachment

ed—even cleaned—while the tower is in operation. Spray sys-

 

of customer supply piping. Inlet and bolt

tems of counterflow towers, being sandwiched between the top

 

circle dimensions shall conform to 125#

of the fill and the drift eliminators, are extremely awkward to

 

flange specifications. The crossover pipe

access and maintain, and require the system to be shut down for

 

shall deliver water through PVC perforat-

cleaning.

 

ed pipes to two open, stainless steel, hot

 

 

water basins at the fan deck elevation.

 

 

Water shall exit these basins to the fill by

 

 

gravity through metering orifice type poly-

 

 

propylene nozzles situated in the basin

 

 

floor. Nozzles shall be easily removable

 

 

and replaceable.

 

7.2Water inlet system shall be self-

 

balancing, requiring no special valving

The Sigma F Series is designed such that the supply piping to

 

for flow regulation from side-to-side of

the tower will not appear outside the tower. Not only does this

 

tower.

enhance the tower's architectural appearance, but it also aids the

7.3

Water distribution system design shall

self-balancing aspect of the Sigma F Series water distribution

system.

 

allow water flow reductions down to

 

 

50% of design flow without modifica-

This feature of the Sigma F Series tower allows you to vary the

 

tions or adjustments.

water circulation rate as an added means of controlling tower per-

 

 

formance capacity during reduced-load or off-season operation.

8.0Casing:

8.1

The endwalls of the tower, as well

■ 8 oz casing panels are also available at reduced cost, but the stur-

 

as the sidewalls above the air inlet

dier 12 oz panels are strongly recommended.

 

elevation to the top of the distribution

 

 

basin, shall be cased with 12 oz/sq

Also, if fire-retardant casing is preferred, it would be appropriate

 

ft horizontally corrugated FRP panels

to add the following sentence to the end of paragraph 8.1 at left:

 

attached to tower columns with stain-

“Casing panels shall have a flame spread rating of 25 or less."

 

less steel self-tapping fasteners and

 

 

self-sealing washers. Panels shall be

Heavy duty architectural casing panels are also available, as

 

lapped to shed water inward to the

described on page 23.

 

tower. Vertical joints shall be lapped

 

 

and sealed watertight. Casing ends at

Architectural treatment can also be enhanced by extending the

 

tower corners shall be covered with

casing up to the top of the fan deck guardrail. This is described on

 

pultruded FRP angles.

page 23.

8.2In the water-washed endwall fill areas, inner casings of 16 gauge 304 stain- less steel shall also be provided.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Marley Sigma F Series Cooling Tower Marley / Sigma F Series CoolingTower / Table of Contents Marley / Sigma F Series CoolingTower Model 13-6Tower 4 MAX SectionelevationPlan Engineering Data Piping Plan Tower Flow/Cell Dimensions ModelSteel Basin End Elevation Steel Basin End ElevationSide Elevation Variable Speed Fan Two-Speed MotorsWater Treatment Sound Control Keeping It CleanEnclosures Base Marley / Sigma F Series CoolingTower / Specifications BaseThermal Performance Construction Mechanical Equipment Fan Deck and Fan CylinderFill, Louvers and Drift Eliminators Casing Hot Water Distribution SystemCold Water Basin Access and SafetyScope of Work Basin Heater Cold Water Basin Options Stainless Steel Cold Water BasinWood Stairway Convenience and Safety Options Fiberglass StairwayPlenum Walkway Ladder Safety CageLadder Extension Hot Water Basin CoversCased Guardrail Air Inlet ScreensAppearance Options Architectural Casing Control Options Control System Mechanical Equipment section when Marley Premium VFD System Miscellaneous Options Galvanized Steel Ladder Vibration Limit SwitchLow Noise Tower Fiberglass LadderFire-Retardant Fiberglass Fan Cylinder ExtensionSpecifications Specification Value West 129 Street Overland PARK, Kansas 66213 United States

FSIG-TS-08A specifications

SPX Cooling Technologies has established itself as a leader in providing innovative cooling solutions, and the FSIG-TS-08A is a shining example of their engineering excellence. This advanced cooling system is designed for a variety of industrial and commercial applications where efficient heat exchange is crucial for optimal performance.

One of the standout features of the FSIG-TS-08A is its highly efficient heat transfer capabilities. The unit utilizes a corrosion-resistant heat exchanger design that enhances thermal performance while reducing maintenance needs. This is crucial in environments where durability and longevity are paramount. The robust construction of the FSIG-TS-08A ensures that it can withstand harsh operating conditions while maintaining its efficiency over time.

Another key characteristic of the FSIG-TS-08A is its energy-saving capabilities. In an era where energy costs are continually rising, this cooling solution incorporates advanced technologies that optimize energy consumption, leading to significant cost savings. The design includes variable speed fans that automatically adjust their operation based on cooling demand, which minimizes energy usage without sacrificing performance.

Moreover, the FSIG-TS-08A is equipped with a user-friendly control system, allowing operators to easily monitor and manage the unit's performance. The integrated controls provide real-time data on system operation and efficiency, further enhancing operational reliability.

The FSIG-TS-08A also boasts a compact design, making it suitable for installation in spaces where traditional cooling solutions may not fit. Its streamlined footprint does not compromise its cooling capability, making it an ideal choice for a wide range of settings, including manufacturing plants, power generation facilities, and other industrial operations.

In terms of versatility, the FSIG-TS-08A can be customized to meet specific requirements based on the application. This adaptability empowers businesses to leverage the cooling system to meet their unique challenges effectively.

In summary, SPX Cooling Technologies' FSIG-TS-08A is a cutting-edge cooling solution combining efficiency, durability, and flexibility. With its advanced technologies, energy-saving features, and user-friendly controls, the FSIG-TS-08A is well-equipped to meet the demanding needs of today's industrial landscape. It is a testament to SPX's commitment to delivering high-quality, innovative products that help organizations improve their operational efficiency while reducing their environmental footprint.
Top Page Image Contents