HP Folio 13-2000, Folio B0N00LAABM manual Setting passwords in Setup Utility Bios

Setting passwords in Setup Utility (BIOS)

Password	Function
Administrator password*	● Must be entered each time you access Setup Utility
	(BIOS).
	● If you forget your administrator password, you cannot
	access Setup Utility (BIOS).
	NOTE: The administrator password can be used in place of
	the power-on password.
	NOTE: Your administrator password is not interchangeable
	with an administrator password set in Windows, nor is it
	displayed as it is set, entered, changed, or deleted.
	NOTE: If you enter the power-on password at the first
	password check before the “Press the ESC key for Startup
	Menu” message is displayed, you must enter the
	administrator password to access Setup Utility (BIOS).
Power-on password*	● Must be entered each time you turn on or restart the
	computer, or exit Hibernation.
	● If you forget your power-on password, you cannot turn
	on or restart the computer, or exit Hibernation.
	NOTE: The administrator password can be used in place of
	the power-on password.
	NOTE: A power-on password is not displayed as it is set,
	entered, changed, or deleted.

To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):

1.Open Setup Utility (BIOS) by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc.

2.Use the arrow keys and follow the on-screen instructions. When the Startup Menu is displayed, press f10.

3.Use the arrow keys to select Security, and then follow the on-screen instructions.

Your changes take effect when the computer restarts.

52 Chapter 9 Securing your computer and information