Primary hard drive
NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector cable.
Description | Spare part number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hard Drive Hardware Kit (includes primary hard drive bracket and cable and secondary hard drive | |
bracket and cable) |
|
|
|
Before removing the primary hard drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 37).
5.Remove the memory module compartment cover (see Memory module on page 42).
6.Remove the hard drive cover (see Primary hard drive on page 38).
Remove the primary hard drive:
1.Loosen the two captive Phillips screws that secure the hard drive cover to the computer.
38 Chapter 4 Removal and replacement procedures | ENWW |