
4.Remove the USB/Card Reader board (4).
Reverse this procedure to install the USB/Card Reader board.
Optical drive
NOTE: The optical drive spare part kit includes a optical drive bracket.
Description | Spare part number |
|
|
|
|
DVD±RW and | |
|
|
Before removing the optical drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 37), and then remove the following components:
a.memory module compartment cover (see Memory module on page 42)
b.Keyboard (see Keyboard on page 50)
c.Top cover (see Top cover on page 52)
ENWW | Component replacement procedures 57 |