
11.If it is necessary to replace the display hinges and hinge covers:
a.Remove the two Phillips PM2.0×4.0 screws (1) that secure the hinge covers to the display bezel.
b.Remove the hinge covers (2).
c.Remove the six Phillips PM2.5×5.0 screws (1) that secure the hinges to the display panel.
d.Remove the four Phillips PM2.0×4.0 screws (2) that secure the hinges to the display panel.
e.Remove the hinges (3). The hinge covers are available using spare part number
ENWW | Component replacement procedures 75 |