
8.If it is necessary to replace the webcam/microphone module:
a.Remove the Phillips PM2.0×4.0 screw (1) that secures the webcam/microphone module to the display bezel.
b.Release the webcam/microphone module (2) as far as the webcam/microphone module allows.
c.Disconnect the webcam/microphone module cable (3) from the webcam/microphone module.
d.Remove the webcam/microphone module. The webcam/microphone module is available using spare part number
9.If it is necessary to replace the Bluetooth module:
a.Detach the Bluetooth module (1) from the display bezel. (The Bluetooth module is attached to the display bezel using
ENWW | Component replacement procedures 73 |